Baseten Terms and Conditions

Baseten · Official agreement

Read the agreement

15 of 115 cards in Security & Safeguards

Security & Safeguards · Company commitment

Baseten commits to security measures for Customer Content in its control

Baseten will implement and maintain technical and organizational measures designed to protect Customer Content in Baseten's possession or control against accidental or unlawful destruction, loss, alteration, and unauthorized disclosure or access, as described in Annex I (the "Security Measures"). Baseten may update the Security Measures from time to time as long as the update does not materially decrease the overall protection of Customer Content in its possession or control. The measures are "designed to" protect and cover only Customer Content that Baseten holds or controls.

Supporting quotations

Baseten will implement and maintain technical and organizational measures designed to protect Customer Content in the possession or under the control of Baseten against accidental or unlawful destruction, loss, alteration, unauthorized disclosure of or access thereto as described in Annex I (the “Security Measures”).
Baseten may update the Security Measures from time to time, so long as the updated measures do not materially decrease the overall protection of Customer Content in the possession or under the control of Baseten.
“Customer Content” means any content and information provided or submitted by, or on behalf of, Customer, its Authorized Users or End Users for use with the Services.

Qualifications & exceptions

  • Applies to Customer Content "in the possession or under the control of Baseten".
  • The measures are "designed to" protect; the text does not guarantee that no loss or unauthorized access will occur.
  • Updates are allowed if they do not materially decrease overall protection.

Cross-references

Also annotated in the same passage (5)

Security & Safeguards · Restriction or exception

If the Customer is the Hosting Party, it alone secures what it hosts

For any platform product where the Customer is the Hosting Party, the Customer is solely responsible for implementing and maintaining (i) technical and organizational measures designed to prevent accidental or unlawful destruction, loss, alteration, or unauthorized disclosure of or access to the products it hosts, and (ii) the egress for those products that Baseten needs in order to provide the Services. This shifts security duties for Customer-hosted products to the Customer.

Supporting quotations

With respect to any Baseten Products & Services for which the Customer is the Hosting Party, the Customer will be solely responsible for implementing and maintaining (i) technical and organizational measures designed to prevent accidental or unlawful destruction, loss, alteration, unauthorized disclosure of or access to the Baseten Products & Services hosted by Customer; and (ii) egress for the Baseten Products & Services hosted by Customer necessary for Baseten to provide the Services.

Qualifications & exceptions

  • Applies only to products for which the Customer is the Hosting Party.
  • Includes making available egress that Baseten needs to provide the Services.

Not stated here

  • The text does not say which products, if any, are Customer-hosted; that depends on the Order and the Hosting Party definition.
Also annotated in the same passage (1)

Security & Safeguards · Company commitment

Annex I lists security governance, audit, change and incident procedures

Annex I (the Security Measures referred to in Section 2.4) lists an information security program with organizational management and staff responsible for its development, implementation and maintenance; audit and risk assessment procedures for periodic review of risks to Baseten; change management procedures and tracking mechanisms designed to test, approve and monitor material changes to Baseten's technology and information assets; and incident management procedures designed to let Baseten investigate, respond to, mitigate and notify of events related to those assets. The text states these as procedures "designed" for a purpose; it does not state results, audit schedules or notification deadlines.

Supporting quotations

Organizational management and staff responsible for the development, implementation and maintenance of Baseten’s information security program.
Audit and risk assessment procedures designed for the purposes of periodic review and assessment of risks to Baseten.
Change management procedures and tracking mechanisms designed to test, approve and monitor material changes to Baseten’s technology and information assets.
Incident management procedures designed to allow Baseten to investigate, respond to, mitigate and notify of events related to the Baseten’s technology and information assets.

Qualifications & exceptions

  • The incident management procedures are described as designed to allow Baseten to "investigate, respond to, mitigate and notify of events" and do not state who is notified or when.
  • Audit and risk assessment procedures are described as "periodic" with no stated interval.

Not stated here

  • The Annex does not give audit frequency, incident notification deadlines or the recipients of incident notifications.

Security & Safeguards · Company practice

Annex I data security, access, password, logging and disposal controls are "may include" and "designed to"

Annex I describes data security controls "which may include, as appropriate to the relevant data" logical segregation of data, restricted (for example role-based) access and monitoring, and commercially available industry standard encryption for personal data transmitted over public networks or wirelessly, at rest, or stored on portable or removable media. It also lists logical access controls designed to manage electronic access (need-to-know and least privilege access, unique IDs and passwords, periodic review, and prompt revocation when employment ends or changes), password controls (strength, expiration and usage, including no sharing), system audit or event logging and monitoring of user access and system activity, and operational controls for configuration, monitoring and maintenance, including secure disposal of systems and media so data is undecipherable or unrecoverable before release from Baseten's possession.

Supporting quotations

Data security controls which may include, as appropriate to the relevant data, logical segregation of data, restricted (e.g., role-based) access and monitoring, and utilization of commercially available industry standard encryption technologies for personal data that is transmitted over public networks (i.e., the Internet) or when transmitted wirelessly or at rest or stored on portable or removable media
Logical access controls designed to manage electronic access to data and system functionality based on authority levels and job functions, (e.g., granting access on a need-to-know and least privilege basis, use of unique IDs and passwords for all users, periodic review and revoking/changing access promptly when employment terminates or changes in job functions occur).
Password controls designed to manage and control password strength, expiration and usage including prohibiting users from sharing passwords.
System audit or event logging and related monitoring procedures designed to proactively record user access and system activity.
including secure disposal of systems and media to render information or data contained therein as undecipherable or unrecoverable prior to final disposal or release from the Baseten’s possession.

Qualifications & exceptions

  • Data security controls "may include" the listed items "as appropriate to the relevant data"; they are not all promised for all data.
  • Encryption is described as commercially available industry standard encryption for personal data in transit over public networks or wirelessly, at rest, or on portable or removable media.
  • Logical access, password, logging and disposal controls are described as "designed to" achieve their stated purposes.

Not stated here

  • The Annex does not name encryption standards or key lengths, and does not say whether encryption applies to all stored personal data or only the listed cases.

Security & Safeguards · Company practice

Annex I also lists network, vulnerability management and continuity measures

Annex I lists network security controls designed to provide for enterprise firewalls, layered DMZ architectures, intrusion detection systems and other traffic and event correlation procedures to protect systems from intrusion and limit the scope of any successful attack. It also lists vulnerability assessment, patch management and threat protection technologies with scheduled monitoring to identify, assess, mitigate and protect against security threats, viruses and other malicious code, and business resiliency, continuity and disaster recovery procedures designed to maintain service or recover from foreseeable emergencies or disasters.

Supporting quotations

Network security controls that designed to provide for the use of enterprise firewalls and layered DMZ architectures, and intrusion detection systems and other traffic and event correlation procedures designed to protect systems from intrusion and limit the scope of any successful attack.
Vulnerability assessment, patch management and threat protection technologies, and scheduled monitoring procedures designed to identify, assess, mitigate and protect against identified security threats, viruses and other malicious code.
Business resiliency/continuity and disaster recovery procedures designed to maintain service and/or recovery from foreseeable emergencies or disasters.

Qualifications & exceptions

  • All three groups are described as procedures or controls "designed to" achieve stated aims; no specific outcomes, recovery times or test frequency are stated.
  • Disaster recovery covers "foreseeable" emergencies or disasters.

Not stated here

  • The Annex does not state recovery time or recovery point objectives or how often monitoring is scheduled.

Security & Safeguards · Context

A Personal Data Breach excludes unsuccessful attempts and network attacks that do not compromise data

A "Personal Data Breach" is a breach of Baseten's security resulting in the accidental or unlawful destruction, loss, alteration, unauthorized disclosure of, or access to, Customer Personal Data in Baseten's possession, custody or control. It does not include unsuccessful attempts or activities that do not compromise the security of Customer Personal Data, such as unsuccessful log-in attempts, pings, port scans, denial of service attacks or other network attacks on firewalls or networked systems. Because of this definition, the DPA's breach notification duty covers only these breaches of Customer Personal Data Baseten holds or controls.

Supporting quotations

“Personal Data Breach” means a breach of Baseten’s security resulting in the accidental or unlawful destruction, loss, alteration, unauthorized disclosure of, or access to, Customer Personal Data in Baseten’s possession, custody or control.
For clarity, Personal Data Breach does not include unsuccessful attempts or activities that do not compromise the security of Customer Personal Data (such as unsuccessful log-in attempts, pings, port scans, denial of service attacks, or other network attacks on firewalls or networked systems).

Qualifications & exceptions

  • Covers Customer Personal Data in Baseten's possession, custody or control.
  • Excludes unsuccessful attempts and activities that do not compromise the security of Customer Personal Data.

Security & Safeguards · Company commitment

Baseten checks reliability of personnel and binds them to confidentiality

Baseten will take commercially reasonable steps to ascertain the reliability of any Baseten Personnel who Process Customer Personal Data, and will enter into written confidentiality agreements with all such Personnel who are not already subject to professional or statutory confidentiality obligations.

Supporting quotations

Baseten shall take commercially reasonable steps to ascertain the reliability of any Baseten Personnel who Process Customer Personal Data, and shall enter into written confidentiality agreements with all Baseten Personnel who Process Customer Personal Data that are not subject to professional or statutory obligations of confidentiality.

Qualifications & exceptions

  • Applies to Baseten Personnel who Process Customer Personal Data; the written confidentiality agreement is needed only for those not subject to professional or statutory confidentiality.

Not stated here

  • The text does not say what steps Baseten takes to ascertain reliability.

Security & Safeguards · Company commitment

The DPA commits Baseten to the Annex 4 security measures and allows updates

Baseten will implement and maintain the technical and organizational measures for Customer Personal Data described in Annex 4 (Security Measures), which are designed to protect Customer Personal Data against a Personal Data Breach. Baseten may update the Security Measures from time to time, provided the update does not materially decrease the overall protection of Customer Personal Data. The Terms refer to Annex I for the Security Measures, while the DPA refers to Annex 4; the two annexes list different text.

Supporting quotations

Baseten shall implement and maintain technical and organizational measures in relation to Customer Personal Data described in Annex 4 (Security Measures) (the “Security Measures”), which are designed to protect Customer Personal Data against a Personal Data Breach.
Baseten may update the Security Measures from time to time, provided the updated measures do not materially decrease the overall protection of Customer Personal Data.

Qualifications & exceptions

  • The measures are "designed to protect" against a Personal Data Breach; updates must not materially decrease overall protection.

Not stated here

  • The text does not say whether Annex I of the Terms or Annex 4 of the DPA controls where they differ for Customer Personal Data.

Security & Safeguards · Company commitment

Baseten notifies the Customer without undue delay after discovering a Personal Data Breach

Baseten will notify the Customer without undue delay upon discovering a Personal Data Breach affecting Customer Personal Data. It will provide information, insofar as that information is within its possession and knowledge and would not compromise the security of Personal Data it Processes, to help the Customer meet its obligations under Applicable Data Protection Laws to report the breach. Baseten's notice or response does not mean Baseten acknowledges fault or liability. Baseten will also reasonably co-operate with the Customer and take commercially reasonable steps the Customer directs to help investigate the breach.

Supporting quotations

Baseten shall notify Customer without undue delay upon Baseten’s discovering a Personal Data Breach affecting Customer Personal Data.
Baseten shall provide Customer with information (insofar as such information is within Baseten’s possession and knowledge and does not otherwise compromise the security of any Personal Data Processed by Baseten) to assist Customer to meet its obligations under the Applicable Data Protection Laws to report the Personal Data Breach.
Baseten’s notification of or response to a Personal Data Breach shall not be construed as Baseten’s acknowledgement of any fault or liability with respect to the Personal Data Breach.
Baseten shall reasonably co-operate with Customer and take such commercially reasonable steps as may be directed by Customer to assist in the investigation of any such Personal Data Breach.

Qualifications & exceptions

  • Notice runs from Baseten "discovering" the breach and is "without undue delay"; no fixed number of hours or days is stated.
  • Information sharing is limited to what is within Baseten's possession and knowledge and does not compromise the security of Personal Data.
  • Baseten's notification or response is not an acknowledgement of fault or liability.

Not stated here

  • The DPA does not give a fixed notification deadline.

Security & Safeguards · Restriction or exception

The Customer handles third-party breach notices and must consult Baseten about mentions of it

The Customer is solely responsible for complying with notification laws that apply to it and for fulfilling any third-party notification obligations related to Personal Data Breaches. If the Customer decides a breach must be notified to a Supervisory Authority, Data Subjects, the public or others, and the notice directly or indirectly refers to or identifies Baseten, then where permitted by applicable laws the Customer agrees to notify Baseten in advance and to consult in good faith and consider clarifications or corrections Baseten reasonably recommends or requests that relate to Baseten's involvement or relevance and are consistent with applicable laws.

Supporting quotations

Customer is solely responsible for complying with notification laws applicable to Customer and fulfilling any third-party notification obligations related to any Personal Data Breaches.
If Customer determines that a Personal Data Breach must be notified to any Supervisory Authority, any Data Subject(s), the public or others under Applicable Data Protection Laws, to the extent such notice directly or indirectly refers to or identifies Baseten, where permitted by applicable laws, Customer agrees to:
notify Baseten in advance; and
in good faith, consult with Baseten and consider any clarifications or corrections Baseten may reasonably recommend or request to any such notification, which: (i) relate to Baseten’s involvement in or relevance to such Personal Data Breach; and (ii) are consistent with applicable laws.

Qualifications & exceptions

  • The advance notice and consultation apply only where permitted by applicable laws and where the notice refers to or identifies Baseten.
  • Baseten's recommended changes must relate to its involvement or relevance and be consistent with applicable laws; the Customer must consider them, not necessarily adopt them.

Security & Safeguards · Procedure

Audits need an agreed plan, and a recent SOC 2 or ISO report can replace an audit

Before any audit the Customer must submit a detailed proposed audit plan that provides for confidential treatment of the information exchanged and any reports, and that describes the proposed scope, duration and start date. Baseten will review the plan, raise any concerns or questions (for example requests that could compromise its security, privacy, employment or other policies) and work cooperatively with the Customer to agree a final plan. If the controls or measures to be assessed are addressed in a SOC 2 Type 2, ISO, NIST or similar audit report by a qualified third-party auditor within twelve months of the audit request (an "Audit Report"), and Baseten has confirmed in writing that there are no known material changes in the controls the report covers, the Customer agrees to accept the report instead of an audit of those controls.

Supporting quotations

Prior to conducting any audit, Customer must submit a detailed proposed audit plan providing for the confidential treatment of all information exchanged in connection with the audit and any reports regarding the results or findings thereof. The proposed audit plan must describe the proposed scope, duration, and start date of the audit.
Baseten will work cooperatively with Customer to agree on a final audit plan.
If the controls or measures to be assessed in the requested audit are addressed in a SOC 2 Type 2, ISO, NIST or similar audit report performed by a qualified third-party auditor within twelve (12) months of Customer’s audit request (“Audit Report”) and Baseten has confirmed in writing that there are no known material changes in the controls audited and covered by such Audit Report(s), Customer agrees to accept provision of such Audit Report(s) in lieu of requesting an audit of such controls or measures.

Qualifications & exceptions

  • The substitute report must cover the controls to be assessed, come from a qualified third-party auditor, be within twelve months of the audit request, and be accompanied by Baseten's written confirmation of no known material changes.
  • The final audit plan is agreed cooperatively; the text does not say what happens if the parties cannot agree.

Not stated here

  • The DPA does not state what happens if the parties fail to agree on a final audit plan.

Security & Safeguards · Restriction or exception

Baseten may refuse premises access in listed situations and limits audits to once a year

Baseten need not give access to its premises for an audit or inspection (a) where an Audit Report is accepted in place of those controls; (b) to any individual who does not produce reasonable evidence of identity; (c) to any auditor Baseten has not approved in advance, acting reasonably; (d) to any individual who has not signed a non-disclosure agreement with Baseten on terms acceptable to Baseten; (e) outside normal business hours at those premises; or (f) on more than one occasion in any calendar year during the term, except for audits or inspections the Customer is required to carry out under Applicable Data Protection Laws or by a Supervisory Authority. The DPA also does not require Baseten to give more information about its Sub-Processors in these audits than the Sub-Processors make generally available to their customers, and does not oblige Baseten to breach any duty of confidentiality.

Supporting quotations

Baseten need not give access to its premises for the purposes of such an audit or inspection:
where an Audit Report is accepted in lieu of such controls or measures in accordance with Section 10.6;
to any individual unless they produce reasonable evidence of their identity;
to any auditor whom Baseten has not approved in advance (acting reasonably);
to any individual who has not entered into a non-disclosure agreement with Baseten on terms acceptable to Baseten;
outside normal business hours at those premises; or
on more than one occasion in any calendar year during the term of the Agreement, except for any audits or inspections which Customer is required to carry out under Applicable Data Protection Laws or by a Supervisory Authority.
Nothing in this DPA shall require Baseten to furnish more information about its Sub-Processors in connection with such audits than such Sub-Processors make generally available to their customers.
Nothing in this Section 10 shall be construed to obligate Baseten to breach any duty of confidentiality.

Qualifications & exceptions

  • The one-occasion-per-calendar-year limit has an exception for audits the Customer is required to carry out under Applicable Data Protection Laws or by a Supervisory Authority.
  • The non-disclosure agreement must be on terms acceptable to Baseten; auditor approval is by Baseten acting reasonably.

Not stated here

  • Section references inside the list ("Section 10.6") are not shown as numbers in the supplied text; the reference points to the Audit Report paragraph by content.

Security & Safeguards · Restriction or exception

The Customer is solely responsible for how it uses the Services and secures its accounts and systems

Without limiting Baseten's obligations under the DPA's security section, the Customer is solely responsible for its use of the Services, including (a) making appropriate use of the Services to maintain a level of security appropriate to the risk in respect of Customer Personal Data; (b) securing the account authentication credentials, systems and devices the Customer uses to access the Services; (c) securing the Customer's systems and devices that Baseten uses to provide the Services; and (d) backing up Customer Personal Data. The Customer also agrees that the Service, the Security Measures and Baseten's DPA commitments are adequate to meet its needs, including any security obligations the Customer has under Applicable Data Protection Laws, and provide a level of security appropriate to the risk in respect of Customer Personal Data.

Supporting quotations

Customer agrees that, without limiting Baseten’s obligations under Section 5 (Security), Customer is solely responsible for its use of the Services, including (a) making appropriate use of the Services to maintain a level of security appropriate to the risk in respect of the Customer Personal Data; (b) securing the account authentication credentials, systems and devices Customer uses to access the Services; (c) securing Customer’s systems and devices that Baseten uses to provide the Services; and (d) backing up Customer Personal Data.
Customer agrees that the Service, the Security Measures, and Baseten’s commitments under this DPA are adequate to meet Customer’s needs, including with respect to any security obligations of Customer under Applicable Data Protection Laws, and provide a level of security appropriate to the risk in respect of the Customer Personal Data.

Qualifications & exceptions

  • The Customer's responsibilities are stated to be without limiting Baseten's security obligations under the DPA.
  • The adequacy acknowledgement covers the Customer's needs and its own security obligations under Applicable Data Protection Laws.

Not stated here

  • The adequacy statement is the Customer's agreement; the DPA does not say how it affects a later claim that the measures were not adequate.

Security & Safeguards · Company commitment

Annex II to the SCCs points to the DPA security measures and sets Sub-Processor flow-down terms

Annex II to the Appendix to the SCCs refers to Section 5 of the DPA and Annex 4 (Security Measures). If the Customer receives a Data Subject Request under the EU GDPR and needs Baseten's help, it should email Baseten's data protection contact point in Annex 1. When Baseten engages a Sub-Processor under the SCCs, it will enter into a binding contractual arrangement imposing data protection obligations that, in substance, meet or exceed the standards required under the SCCs and the DPA, including on information security measures and notification of Personal Data Breaches to Baseten (the list continues with further items).

Supporting quotations

Please refer to Section 5 of the DPA and Annex 4 (Security Measures) to the DPA.
In the event that Customer receives a Data Subject Request under the EU GDPR and requires assistance from Baseten, Customer should email Baseten’s contact point for data protection identified in Annex 1 (Data Processing Details) to the DPA.
Sub-Processors: When Baseten engages a Sub-Processor under these Clauses, Baseten shall enter into a binding contractual arrangement with such Sub-Processor that imposes upon them data protection obligations which, in substance, meet or exceed the relevant standards required under these Clauses and the DPA – including in respect of:
applicable information security measures;
notification of Personal Data Breaches to Baseten;

Qualifications & exceptions

  • The Sub-Processor arrangements must meet or exceed the standards required under the SCCs and the DPA "in substance".

Security & Safeguards · Company commitment

Annex 4 restates a shorter list of security measures and allows updates that do not decrease security

As from the Addendum Effective Date, Baseten will implement and maintain the Security Measures in Annex 4: data security controls which may include segregation of data, restricted (for example role-based) access and monitoring, and commercially available encryption for Customer Personal Data; logical access controls designed to manage electronic access based on authority levels and job functions; password controls; system audit or event logging; operational procedures and controls for configuration, monitoring and maintenance including secure disposal of systems and media; change management procedures; incident management procedures; and business resiliency, continuity and disaster recovery procedures. Baseten may update or modify the measures from time to time provided the updates do not decrease the overall security of Customer Personal Data. Annex 4 is a shorter list than Annex I of the Terms and does not list network security controls or vulnerability management, which Annex I does.

Supporting quotations

As from the Addendum Effective Date, Baseten will implement and maintain the Security Measures as set out in this Annex 4.
Data security controls which may include segregation of data, restricted (e.g. role-based) access and monitoring, and utilization of commercially available encryption for Customer Personal Data.
Logical access controls designed to manage electronic access to data and system functionality based on authority levels and job functions.
Password controls.
System audit or event logging.
Operational procedures and controls to provide for configuration, monitoring, and maintenance of technology and information systems, including secure disposal of systems and media designed to render all information or data contained therein as undecipherable or unrecoverable prior to final disposal or release from Baseten’s possession.
Change management procedures and tracking mechanisms designed to test, approve and monitor all material changes to Baseten’s technology and information assets.
Incident management procedures designed to allow Baseten to investigate, respond to, mitigate, and notify of events related to Baseten’s technology and information assets.
Business resiliency/continuity and disaster recovery procedures designed to maintain service and/or recovery from foreseeable emergency situations or disasters.
Baseten may update or modify these Security Measures from time to time provided that such updates and modifications do not decrease the overall security of Customer Personal Data.

Qualifications & exceptions

  • Data security controls "may include" the listed items; the other lines are stated as procedures or controls without outcomes.
  • Updates must not "decrease the overall security of Customer Personal Data" (the Terms' update rule asks that overall protection not materially decrease).

Not stated here

  • The text does not say whether Annex I of the Terms or Annex 4 of the DPA controls where they differ for Customer Personal Data.

Cross-references

  • contrast (model-proposed): Baseten commits to security measures for Customer Content in its control — The Terms refer to Annex I for the Security Measures, and the DPA refers to Annex 4. Annex I lists more items (including network security and vulnerability management) than Annex 4, and their update rules are worded differently. The text does not say which controls where they differ.