Owner's manual pairs the replacement-tire warranty with safety guidance
This manual addresses MICHELIN passenger and light truck replacement tires: it presents a limited warranty on workmanship and materials, a treadwear warranty, and tire safety and maintenance tips. Its cover summarizes the offer as a 60-Day Satisfaction Guarantee, 3-Year Roadside Assistance and a Limited Mileage Warranty.
Supporting quotations
Passenger and Light Truck Replacement Tire Limited Warranty, Treadwear Warranty, Safety and Maintenance Tips
The warranty described is for passenger and light truck replacement tires.
Account & Service Control · Procedure
Registration at tireregistration.com is the route into the Promise Plan
The manual tells owners to register their new MICHELIN tires, including by scanning a code, at www.tireregistration.com. Registration makes the tires eligible for the MICHELIN Promise Plan benefits. Michelin also asks for registration so it can contact owners about new safety developments.
Supporting quotations
IMPORTANT! Register your tires at www.tireregistration.com.
Scan the code to register your new Michelin tires.
Upon registration of your tires at www.tireregistration.com, you will be eligible for the benefits of the MICHELIN® Promise Plan™.
it’s important to register your tires so we can contact you about any new safety developments
Qualifications & exceptions
Eligibility for the Promise Plan benefits follows registration of the tires.
Cross-references
contrast (model-proposed): Tire registration is not required for warranty coverage — Registration is presented at the front as the step that makes tires eligible for the Promise Plan benefits, while the back pages say tire registration is not required for warranty coverage. Read together, registration gates the Promise Plan benefits but not the limited warranty itself; the manual does not reconcile the two statements.
Legal Rights & Agreement Rules · Company commitment
The Promise Plan combines a satisfaction guarantee, roadside help and the warranty
Michelin presents the MICHELIN Promise Plan as its backing for a purchase of MICHELIN replacement passenger or light truck tires. The plan lists three benefits: a 60-Day Satisfaction Guarantee, Roadside Assistance and the Manufacturer's Limited Warranty & Treadwear Warranty. The inside front cover is named as the place holding more detail on the plan.
Supporting quotations
*See inside front cover for more details on the MICHELIN Promise Plan™ on MICHELIN brand passenger and light truck replacement tires.
MICHELIN® Promise PlanTM
We want you to be 100% satisfied with your MICHELIN replacement passenger or light truck tires so they are backed by the MICHELIN® Promise Plan™.
The MICHELIN® Promise Plan™ includes the following benefits:
The plan is described for MICHELIN brand passenger and light truck replacement tires.
Legal Rights & Agreement Rules · User right or choice
Unsatisfied buyers can exchange tires within 60 days
Under the 60-Day Satisfaction Guarantee, a buyer who is not 100% satisfied returns the tires and the original sales receipt to the place of purchase within 60 days of purchase, and the dealer exchanges them for a new set of tires of equal or lesser value. The guarantee heading carries footnotes 1 and 2, so the six-tire cap, the exclusions in footnote 1 and the exclusion of Original Equipment tires also limit this exchange.
Supporting quotations
60-Day Satisfaction Guarantee:1,2
If you’re not 100% satisfied with your new tires, just return the tires and original sales receipt to the place where you bought the tires within 60 days of your purchase and the dealer will exchange them for a new set of tires of equal or lesser value.
Qualifications & exceptions
Return must be within 60 days of your purchase.
The tires and original sales receipt must be returned to the place where they were bought.
The replacement set is of equal or lesser value.
Legal Rights & Agreement Rules · Restriction or exception
The guarantee stops at six tires and excludes damage and exchanged tires
Footnote 1 limits the satisfaction guarantee to up to six tires per customer. It applies only to tires that were purchased and mounted, does not apply to exchanged tires provided under the guarantee itself, and does not include the cost of valve stems. Tires damaged by misuse or misapplication, road hazards, mechanical problems related to the vehicle, racing or competitive events, or tires removed from the original vehicle are excluded from the guarantee.
Supporting quotations
Guarantee applies to up to 6 tires per customer.
Guarantee applies only to tires that were purchased and mounted and does not apply to exchanged tires that were provided under this guarantee.
The guarantee does not include the cost of valve stems.
Tires that are damaged due to misuse or misapplication, road hazards, mechanical problems related to the vehicle, use in any racing-related activities, or competitive events, or tires that are removed from the original vehicle on which they were installed, are excluded from guarantee.
Qualifications & exceptions
Up to six tires per customer.
Only tires that were purchased and mounted are covered.
Exchanged tires provided under this guarantee are not covered again.
Legal Rights & Agreement Rules · Restriction or exception
Original Equipment tires fall outside the guarantee, roadside help and warranty
Footnote 2 states that Original Equipment tires are excluded. Its marker appears on the 60-Day Satisfaction Guarantee, the Roadside Assistance for 3 years and the Limited Warranty & Treadwear Warranty headings, so the exclusion is attached to each of those benefits. The manual otherwise speaks of MICHELIN replacement passenger and light truck tires.
Legal Rights & Agreement Rules · Company commitment
Roadside assistance runs around the clock for three years in the U.S. and Canada
For three years after purchase, owners of MICHELIN replacement tires can call 1-888-553-4327 for emergency roadside help at any hour, 365 days a year, in the U.S. and Canada. Michelin describes the benefit as expert emergency help to get the driver back on the road quickly, delivered by a qualified service professional.
Supporting quotations
Roadside Assistance for 3 years:2,4
MICHELIN’S comprehensive roadside assistance provides expert emergency help to get you back on the road quickly: 2,4
Roadside Assistance is available 24 hours a day, 365 days a year in the U.S. and Canada for 3 years after you purchase your MICHELIN replacement tires.
In the event you need roadside assistance, simply call 1-888-553-4327 and a qualified service professional will provide assistance.
Qualifications & exceptions
The three years run from purchase of the MICHELIN replacement tires.
Roadside help changes a flat, brings fluids, unlocks and jump-starts
The roadside benefit covers a flat tire change, delivery of gas, water and other fluids, lockout service and a battery jump start. If no inflated spare is available, towing is provided at no cost up to 150 miles to the nearest approved Michelin tire retailer of the buyer's choice. The consumer pays for delivered goods such as fuel or water.
Supporting quotations
Flat tire change*
Fluid delivery (gas, water, etc.) 3
Lockout service
Battery jump start
*If an inflated spare is not available, towing will be provided at no cost (up to 150 miles) to the nearest approved Michelin tire retailer of your choice.
3 Consumer is responsible for the cost of delivered goods
Qualifications & exceptions
The consumer is responsible for the cost of delivered goods.
Covered towing is capped at 150 miles and goes to the nearest approved Michelin tire retailer.
Legal Rights & Agreement Rules · Restriction or exception
Roadside service leaves out tire repair and many vehicle types
Roadside assistance does not cover repair or replacement of the tire itself. It applies only to motorized passenger and light truck vehicles, and it specifically excludes trailers, recreational vehicles, commercial vehicles and any vehicle used for farm, ranch, agriculture, racing or off-road service.
Supporting quotations
This service does not cover the repair or replacement of your tire. Service applies only to motorized passenger and light truck vehicles and specifically excludes trailers, recreational vehicles, commercial vehicles and any vehicle used for farm, ranch, agriculture, racing, or off-road service.
Qualifications & exceptions
Footnotes 2 and 4 attach the Original Equipment exclusion and the vehicle-type exclusion to the roadside heading.
Legal Rights & Agreement Rules · Company commitment
Limited warranty covers defects in workmanship and materials plus treadwear mileage
Michelin's manufacturer's limited warranty covers certain defects in workmanship and materials, and the treadwear warranty runs for a limited mileage period. The manual directs the owner to review the warranty terms carefully; its later warranty sections state what is covered and for how long, what is not covered, what Michelin will do, how to obtain a replacement, which conditions and exclusions apply, and how to dispute issues.
Your MICHELIN replacement tires are covered by a manufacturer’s limited warranty that covers certain defects in workmanship and materials, and treadwear2,5 warranty for a limited mileage period. You should review the terms of the warranty carefully.
Qualifications & exceptions
The mileage period of the treadwear warranty is limited.
Charges & Financial Obligations · Restriction or exception
Mileage warranties vary by tire line and skip competition tires
Footnote 5 excludes DOT-approved competition tires such as the MICHELIN Pilot Sport Cup 2 from the treadwear warranty. Mileage warranties vary by tire line, and the manual sends the owner to the tire retailer or MichelinMan.com for the specific mileage warranty, including those for split fitments, rather than stating a mileage figure here.
Supporting quotations
5 Excludes DOT-approved competition tires (e.g. MICHELIN® Pilot® Sport Cup 2). Mileage Warranties vary by tire line. See your tire retailer or MichelinMan.com for more details on specific mileage warranties including those for split fitments.
Qualifications & exceptions
The mileage warranty for a given tire line is not specified in this manual.
Not stated here
Which mileage warranty applies to a particular tire line, including split fitments, is not stated in this document.
Legal Rights & Agreement Rules · Company commitment
Warranty runs for the original purchaser of replacement tires in normal service
The limited warranty covers the original purchaser of MICHELIN passenger and light truck replacement tires. Coverage applies to tires used in normal service on the vehicle on which they were originally fitted.
This warranty covers the original purchaser of MICHELIN® passenger and light truck replacement tires.
MICHELIN passenger and light truck replacement tires that are used in normal service on the vehicle on which they were originally fitted are covered as follows:
Qualifications & exceptions
Covers the original purchaser.
The tires must be used in normal service on the vehicle they were originally fitted to.
Legal Rights & Agreement Rules · Company commitment
Workmanship defects are covered to the usable tread or six years
A tire with a defect in workmanship and materials may be replaced on a pro rata basis if the defect appears during the life of the original usable tread or within six years of purchase, whichever comes first. After six years or the wear of the original usable tread, whichever occurs first, all warranties, expressed or implied, expire.
Supporting quotations
WHAT IS COVERED AND FOR HOW LONG?
Workmanship and Materials
If there is a defect in workmanship and materials during the life of the original usable tread, or six (6) years from date of purchase (whichever comes first), your tire may be replaced on a pro rata basis under this warranty. After six (6) years or the wear of the original usable tread, whichever occurs first, all warranties, expressed or implied, expire.
Qualifications & exceptions
Whichever comes first: the life of the usable tread or six years from purchase.
Replacement is on a pro rata basis.
After six years, or once the usable tread is worn, all express and implied warranties expire.
Legal Rights & Agreement Rules · Procedure
Date of purchase means the sales invoice date, or the sidewall date without one
For warranty timing, the date of purchase is the date on the sales invoice. If the owner cannot find the sales invoice, the date is calculated from the manufacture date molded on the tire sidewall.
Supporting quotations
The “date of purchase” refers to the date on your sales invoice. If you cannot find your sales invoice, the date will be calculated based on the date of manufacture which is molded on the sidewall of your tire.
Qualifications & exceptions
Without a sales invoice, the sidewall manufacture date is used.
Usable tread ends at 2/32 inch, the treadwear indicator level
The life of the usable tread is the original tread worn evenly, shoulder to shoulder around the circumference, down to the treadwear indicators at 2/32nds of an inch (1.6 mm) of remaining tread. Michelin's wear bars sit in the tread grooves at the same 2/32nds of an inch, and Michelin says tires must be replaced when the remaining tread matches them.
Supporting quotations
The “life of the usable tread” refers to the original tread worn down evenly, shoulder to shoulder circumferentially, to the level of the treadwear indicators, which is 2/32nds of an inch (1.6 mm) of tread remaining.
The “life of the usable tread” refers to the original tread worn down evenly, shoulder to shoulder circumferentially, to the level of the treadwear indicators, which is 2/32nds of an inch (1.6 mm) of tread remaining.
TREAD WEAR BARS INDICATE THE LIMIT OF TREAD LIFE
MICHELIN® tires contain “Wear Bars” in the tire tread grooves at 2/32nds of an inch (1.6 mm). When the tread remaining matches the height of the Wear Bars, your tires must be replaced to ensure tire safety.
Qualifications & exceptions
Tread is measured shoulder to shoulder around the circumference.
Not stated here
The same usable-tread definition appears twice in the warranty section.
Charges & Financial Obligations · Company commitment
Treadwear credit requires even wear and a 2/32 inch groove difference
If a tire's treadwear does not reach its mileage warranty, a pro rata replacement may be available, but only if the tire is evenly worn: tread groove depth must differ by less than 2/32 of an inch from shoulder to shoulder. Michelin defines uneven wear as wear of one area faster than the adjacent tread.
Supporting quotations
Treadwear
Uneven wear is defined as wear of one area, faster than the adjacent tread.
If the tire treadwear does not reach its mileage warranty a pro rata replacement of the tire may be available under this warranty. Tire must be evenly worn with a tread groove difference less than 2/32 of an inch, from shoulder to shoulder.
Qualifications & exceptions
Tread groove difference must be less than 2/32 inch from shoulder to shoulder.
Uneven wear is wear of one area faster than the adjacent tread.
Not stated here
The manual repeats the uneven-wear definition and renders it as a heading at one point.
qualified by (model-proposed): Rotation every 6,000 to 8,000 miles keeps the treadwear warranty — The rotation duty conditions the treadwear credit: failing to rotate as provided voids the treadwear warranty under which the pro rata replacement is offered.
Legal Rights & Agreement Rules · Restriction or exception
Rotation every 6,000 to 8,000 miles keeps the treadwear warranty
To keep the treadwear warranty, the tires must be rotated every 6,000 to 8,000 miles (10,000 to 12,000 km), or at the vehicle manufacturer's recommended interval if that rotation period is less. Michelin states that failing to rotate the tires as provided voids the treadwear warranty.
Supporting quotations
In order to maintain the treadwear warranty on your tires, the tires must be rotated every 6,000 - 8,000 miles (10,000 -12,000 km), or as recommended by the vehicle manufacturer, whichever rotation period is less. Failure to rotate the tires as provided herein voids the treadwear warranty.
Qualifications & exceptions
The shorter of the Michelin interval and the vehicle manufacturer's recommendation applies.
Charges & Financial Obligations · Restriction or exception
Different front and rear tire sizes halve the rear mileage warranty
When different size tires are used on the front and rear axles, the tires cannot be rotated as Michelin recommends. The mileage warranty on each rear tire is then half the specified mileage.
Supporting quotations
Note that if you use different size tires on the front and rear axles, your tires cannot be rotated as recommended by Michelin. As a result, the mileage warranty on each rear tire will be half that specified.
Qualifications & exceptions
Applies when the front and rear axles carry different size tires.
Charges & Financial Obligations · Procedure
The mileage figure for a specific tire comes from the retailer or Michelin
The manual does not list the mileage warranty figures. It directs the owner to a Michelin tire retailer or to https://www.michelinman.com/auto/assistance/warranty for the mileage warranty associated with a specific tire.
Supporting quotations
For the Mileage warranty associated with a specific tire, please see your Michelin tire retailer or visit https://www.michelinman. com/auto/assistance/warranty.
Qualifications & exceptions
The mileage warranty figure is specific to the tire, not stated in this manual.
Not stated here
The mileage warranty for any particular tire line is not stated in this document.
Legal Rights & Agreement Rules · Restriction or exception
Warranty excludes road hazards, bad mounting and maintenance damage
The warranty does not cover tires damaged by misuse, abuse or accident. Michelin lists road hazards such as cuts, snags, bruises, impact damage or punctures; incorrect mounting, tire/wheel imbalance or improper repair; and misapplication, improper maintenance, racing, underinflation, overinflation or other abuse.
Supporting quotations
WHAT IS NOT COVERED
This warranty does not cover tires damaged due to misuse, abuse or accident such as:
– Incorrect mounting of the tire, tire/wheel imbalance or improper repair;
– Misapplication, improper maintenance, racing, underinflation, overinflation or other abuse;
Qualifications & exceptions
The exclusions apply to tires damaged by misuse, abuse or accident.
Legal Rights & Agreement Rules · Restriction or exception
Warranty also excludes uneven wear, vehicle faults and cosmetic cracking
The exclusions continue with uneven wear of all types and wear caused by a mechanical irregularity in the vehicle such as wheel misalignment, plus accident, fire, chemical corrosion, tire alteration and vandalism. Flat spotting caused by improper storage or brakelock, additives other than air, nitrogen or carbon dioxide such as waterbase sealers or balancing substances, and minor cosmetic ozone or weather cracking are also excluded.
Supporting quotations
– Uneven wear (to include all wear types);
– Wear caused by mechanical irregularity in the vehicle such as wheel misalignment;
– Accident, fire, chemical corrosion, tire alteration or vandalism;
– Flat spotting caused by improper storage or brakelock;
– The addition of liquid, solid or gaseous materials other than air, nitrogen or carbon dioxide (for example, waterbase sealers or balancing substances);
Manual sends owners to registration and online tire-care resources
The manual asks owners to visit www.tireregistration.com to find out how and why to register their new MICHELIN replacement tires, and points to a tire care and driving tips section there. Owners can also sign up at michelinman.com for emails carrying tire safety information, Michelin product news and special offers.
Supporting quotations
Please be sure to visit www.tireregistration.com to find out how and why to register your new MICHELIN® replacement tires. While you’re there, check out our tire care and driving tips section to take full advantage of your new tires. You can also sign up for emails containing valuable tire safety information, Michelin product news and special offers at michelinman.com.
Legal Rights & Agreement Rules · Procedure
Owner is told to read the warranty and the safety recommendations
Michelin tells the owner to read the warranty carefully to understand and comply with its terms and conditions, and says it is essential to read and understand the safety and maintenance recommendations for tires in the Owner's Manual as well.
Supporting quotations
To ensure your understanding of and compliance with the terms and conditions of this warranty, please read it carefully. It is essential that you also read and understand the safety and maintenance recommendations for tires contained in this Owner’s Manual.
Qualifications & exceptions
The safety and maintenance recommendations are presented as essential reading alongside the warranty.
Legal Rights & Agreement Rules · Restriction or exception
ZP and PAX tires must run with an approved low-pressure warning system
MICHELIN Self-Supporting Zero Pressure (ZP) tires must be used only with an operational, Michelin-approved low tire pressure warning system, and Michelin states that otherwise all provisions of the limited warranty are void. ZP tires with the SH-M sidewall designation must not be mounted on a standard wheel, which also voids the warranty, and PAX System tires require a tire pressure monitoring system approved by the vehicle manufacturer. Tires without a properly operating low inflation warning system are among the excluded uses.
Supporting quotations
– Use of MICHELIN® Self-Supporting Zero Pressure (ZP) tires without a properly operating low inflation warning system.
MICHELIN® SELF-SUPPORTING ZERO PRESSURE™ (ZP) TIRES MUST BE USED ONLY WITH AN OPERATIONAL, MICHELIN APPROVED, LOW TIRE PRESSURE WARNING SYSTEM. Otherwise, all provisions of the limited warranty are void.
NOTE: Some MICHELIN Self-Supporting Zero Pressure (ZP) tires can only be mounted on special SH-M (Symmetric Hump - Modified) wheels.
PAX SYSTEM TIRES ARE TO BE USED ONLY WITH AN OPERATIONAL TIRE PRESSURE MONITORING SYSTEM (TPMS) APPROVED BY THE VEHICLE MANUFACTURER FOR USE WITH THE PAX SYSTEM.
Qualifications & exceptions
The warning system must be operational and Michelin-approved.
SH-M designated ZP tires require special wheels.
PAX System tires require a vehicle-manufacturer-approved TPMS.
Not stated here
The lists of approved systems are not reproduced in this manual; Michelin points to its retailers and phone numbers.
Legal Rights & Agreement Rules · Restriction or exception
Warranty excludes use against the manual's safety and maintenance information
The warranty does not cover use of MICHELIN tires that is inconsistent with the safety and maintenance information provided in the owner's manual. This ties coverage to the manual's tire care instructions, not only to the warranty clauses.
Supporting quotations
– Use of MICHELIN tires that is inconsistent with the safety and/or maintenance information provided in your owner’s manual.
Legal Rights & Agreement Rules · Restriction or exception
Limitations list repeats the rotation void and staggered-size half mileage
Michelin's list of other limitations records that failure to rotate the tires as recommended voids the treadwear warranty and that the rear mileage warranty is half the specified mileage where the front and rear tire sizes differ. The list is introduced as non-exhaustive.
Supporting quotations
Other limitations include but are not limited to the following:
– Failure to rotate your tires as recommended by Michelin voids the treadwear warranty.
– The mileage warranty on each rear tire will be half that specified for tires that cannot be rotated as recommended by Michelin because the tire size on the front axle of the vehicle is different from that on the rear axle.
Qualifications & exceptions
The limitations are introduced as including but not limited to the items listed.
Charges & Financial Obligations · Restriction or exception
Other limitations cap ZP mileage and exclude commercial, competition and winter misuse
ZP tires carry the same mileage warranty as the standard tire line they belong to, capped at 30,000 miles. There is no treadwear warranty for tires used in commercial applications such as mail carrier, taxi cab or ride sharing vehicles, for original equipment tires, or for DOT-approved competition tires such as the MICHELIN Pilot Sport Cup 2, which are excluded from any mileage warranty. Motor tricycles are excluded from treadwear mileage warranties and the MICHELIN Promise Plan. Winter tires must be used only during September through April and need documentation of each winter's installation and removal to keep treadwear coverage, and only the original purchaser can participate in the Treadwear Warranty.
Supporting quotations
– MICHELIN® Self-Supporting Zero Pressure (ZP) tires have the same mileage warranty as the standard tire line of which they are a part, up to, but not exceeding, 30,000 miles.
– No treadwear warranty for tires used in commercial applications (such as mail carrier, taxi cab or ride sharing vehicles).
– DOT-approved competition tires (e.g., MICHELIN® Pilot® Sport Cup 2 tires) are excluded from any mileage warranty.
– Motor Tricycle vehicles are excluded from treadwear mileage warranties and the MICHELIN® Promise PlanTM.
– Winter tires must be used during winter months only. These include the months of September through April, defined as a period beginning on or after September 1st of a given year and ending no later than April 30th of the following year. MICHELIN® winter tires require documentation of the timing of the installation and removal of the tires each winter to maintain coverage under the limited warranty for treadwear.
– No treadwear warranty for tires delivered as original equipment on your vehicle.
– You must be the original purchaser of tires to participate in the Treadwear Warranty.
Qualifications & exceptions
The list is non-exhaustive.
Winter use runs from September 1 at the earliest to April 30 of the following year.
Charges & Financial Obligations · Company commitment
Early workmanship replacements are free within 12 months
For a covered tire with 2/32nds of an inch (1.6 mm) or less of the original tread worn, or 25% or less worn, whichever is more beneficial to the owner, and within 12 months of the date of purchase, Michelin will replace the tire free of charge with a comparable new MICHELIN replacement tire, and will mount and balance it. The owner pays other service charges and applicable taxes, including PAX Gel or Gel 3 packs.
Supporting quotations
WHAT WILL MICHELIN DO?
Workmanship/Materials
If a tire is covered, and 2/32nds of an inch (1.6 mm) or less of the original tread is worn (or 25% or less, whichever is more beneficial to you), and it is within 12 months of the date of purchase, Michelin will, free of charge, replace your tire with a comparable new MICHELIN® replacement tire, mount the tire, and balance the tire. You must pay the cost of any other service charges and applicable taxes, including PAX Gel/Gel 3 packs.
Qualifications & exceptions
Limited to 2/32nds of an inch or 25% or less of the original tread, whichever is more beneficial to the owner.
Limited to 12 months from the date of purchase.
Charges & Financial Obligations · Company commitment
Later workmanship replacements are shared pro rata from tread used
Where more than 2/32nds of an inch or more than 25% of the tread is worn, whichever is more beneficial to the owner, or more than 12 months have passed since purchase, Michelin replaces the tire on a pro rata basis. The Michelin tire retailer calculates the owner's share by multiplying the percentage of the original usable tread worn by the current selling price of the replacement tire at the adjustment location. The owner also pays in full for mounting and balancing, other service charges and applicable taxes.
Supporting quotations
If a tire is covered, and more than 2/32nds of an inch of original tread has been worn (or more than 25%, whichever is more beneficial to you), or it has been more than 12 months from the date of purchase, Michelin will replace the tire with a comparable new MICHELIN replacement tire on a pro rata basis.
The Michelin tire retailer will determine the portion for which you will be responsible by multiplying the percentage of the original usable tread worn, by the current selling price of the replacement tire at the adjustment location.*
*Alternatively, membership clubs may multiply the percentage of the original usable tread worn by the actual price paid by the consumer for the warrantable tires (including any instant rebates or promotions).
The “date of purchase” refers to the date on your sales invoice. If you cannot find your sales invoice, the date will be calculated based on the date of manufacture which is molded on the sidewall of your tire.
Qualifications & exceptions
The pro rata share is the percentage of the original usable tread worn times the current selling price at the adjustment location.
Membership clubs may instead multiply the percentage worn by the price the consumer actually paid, including rebates or promotions.
The owner pays mounting, balancing, other service charges and taxes in full.
Charges & Financial Obligations · Company commitment
Treadwear replacement is pro rata from mileage received
If a covered tire wears out evenly across the tread face before delivering the warranted mileage, Michelin replaces it with a comparable new MICHELIN replacement tire on a pro rata basis. The retailer multiplies the percent of mileage received by either the current actual selling price at the adjustment location or the price in the current Michelin Base Price List, whichever is lower. The owner pays in full for mounting and balancing, other service charges and applicable taxes.
Supporting quotations
Treadwear
If a tire is covered and wears out evenly across the face of the tread before delivering the warranted mileage, Michelin will replace the tire with a comparable new MICHELIN® replacement tire on a pro rata basis.
The Michelin tire retailer will determine the portion for which you will be responsible by multiplying the percent of mileage received by the current actual selling price at the adjustment location or the price of the tire in the current Michelin Base Price List, whichever is lower.
Qualifications & exceptions
The tire must wear out evenly across the face of the tread.
The owner's share uses the lower of the adjustment-location price and the Michelin Base Price List price.
The owner pays mounting, balancing, other service charges and taxes in full.
Legal Rights & Agreement Rules · Restriction or exception
Treadwear credit needs records, one owner and the same vehicle
Evenly worn tires get a treadwear replacement only if four conditions hold. The claimant must be the original purchaser, must own the vehicle the tires were originally installed on, and the tires must have been used only on that vehicle. The tires must be rotated and inspected every 6,000 to 8,000 miles (10,000 to 12,000 km), or as the vehicle manufacturer specifies if that interval is shorter, with the Mounting and Rotation Service Record fully completed and signed. The completed Service Record form, the Original Owner/Tire Installation Information form and the original invoice must be presented to a participating Michelin tire retailer at the adjustment claim. The tires must not have become unserviceable due to a condition listed under WHAT IS NOT COVERED.
Supporting quotations
Tires which wear out evenly before delivering the warranted mileage will be replaced on a pro rata basis only if:
You are the original purchaser of the tires, you own the vehicle on which they were originally installed, and the tires have been used only on that vehicle;
The tires have been rotated and inspected every 6,000-8,000 miles (10,000-12,000 km), or as specified by your vehicle manufacturer, whichever rotation period is less, and the Mounting and Rotation Service Record has been fully completed and signed.
The completed Service Record form, Original Owner/Tire Installation Information form, and the original Invoice are presented to a participating Michelin tire retailer at the time of adjustment claim, and
The tires have not become unserviceable due to a condition listed under WHAT IS NOT COVERED.
WHAT IS NOT COVERED
Qualifications & exceptions
The shorter of Michelin's interval and the vehicle manufacturer's specification applies.
The tires must not have become unserviceable for a reason in the exclusion list.
Legal Rights & Agreement Rules · Procedure
Replacement claims go through any MICHELIN retailer with documents and payment
An owner takes the tire to any MICHELIN tire retailer, who may require one or more of the following: the vehicle the tire was used on, personal identification such as a driver's license, the vehicle registration, payment of any pro rata share, a completed Service Record form and Original Owner/Tire Installation Information Form, the original invoice and a copy of the Owner's Manual. Treadwear claims also have to meet the Treadwear section's additional requirements.
Supporting quotations
HOW DO I GET A REPLACEMENT?
Take your tire to any MICHELIN tire retailer. The retailer will require that you provide one or more the following:
The vehicle on which the tire was used,
Personal identification (e.g. Driver’s License),
Your vehicle registration,
Payment if you owe a pro rata share for the replacement,
A completed Service Record form, and Original Owner/Tire Installation Information Form,
Your original invoice and copy of this Owner’s Manual, and/or
For treadwear replacement claims, see the Treadwear section above for additional requirements.
Qualifications & exceptions
The retailer may require one or more of the listed items.
Treadwear claims need the additional Treadwear section conditions.
Charges & Financial Obligations · Company practice
Membership clubs may base the pro rata share on the price actually paid
For tires bought through membership clubs, the club may calculate the owner's pro rata share by multiplying the percentage of the original usable tread worn by the price the consumer actually paid for the warrantable tires, including any instant rebates or promotions, instead of the current selling price at the adjustment location.
Supporting quotations
*Alternatively, membership clubs may multiply the percentage of the original usable tread worn by the actual price paid by the consumer for the warrantable tires (including any instant rebates or promotions).
Qualifications & exceptions
Applies to tires purchased through membership clubs.
Legal Rights & Agreement Rules · Restriction or exception
Warranty pays no lost time, lost use or consequential damage, where state law allows
The warranty does not compensate for loss of time, loss of use of the vehicle, inconvenience or consequential damage. Michelin notes that some states do not allow the exclusion or limitation of incidental or consequential damages, so those limitations or exclusions may not apply to the owner.
Supporting quotations
WHAT CONDITIONS AND EXCLUSIONS APPLY?
This warranty does not provide compensation for loss of time, loss of use of vehicle, inconvenience or consequential damage. Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations or exclusions may not apply to you.
Qualifications & exceptions
State law that forbids the exclusion or limitation of incidental or consequential damages overrides this exclusion.
Legal Rights & Agreement Rules · Restriction or exception
The warranty limits how long express and implied claims last, subject to state law
The warranty states that it limits the length of all express and implied claims. It adds that some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to the owner. The sentence does not itself restate the period; the workmanship coverage period is stated earlier in the warranty.
Supporting quotations
This warranty limits the length of all express and implied claims. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
Qualifications & exceptions
State law that forbids limiting the duration of implied warranties overrides this limitation.
Not stated here
The clause says it limits the length of 'all express and implied claims' rather than restating the implied warranty period.
Legal Rights & Agreement Rules · Company practice
Claimed tires stay with the owner until Michelin accepts them
Tires presented for a claim remain the consumer's property. Michelin is not responsible for loss of or damage to tires in the custody or control of a Michelin tire retailer while they are inspected for a warranty claim, and in a disputed claim the consumer must make the tire available for further inspection. Tires accepted for a claim become Michelin's property.
Supporting quotations
Tires presented for claim remain the property of the consumer, and Michelin is not responsible for loss of or damage to tires which are in the custody or control of a Michelin tire retailer for the purpose of inspection for warranty claims. In the event of a disputed claim, the consumer must make the tire available for further inspection. Tires accepted for claim become the property of Michelin.
Qualifications & exceptions
A disputed claim requires the consumer to make the tire available for further inspection.
Legal Rights & Agreement Rules · Restriction or exception
Only the written warranty counts, and it applies only in the United States and Canada
No Michelin representative, employee or retailer has authority to make or imply any representation, promise or agreement that varies the warranty's terms. The limited warranties apply only in the United States and Canada.
Supporting quotations
No Michelin representative, employee or retailer has the authority to make or imply any representation, promise or agreement, which in any way varies the terms of this warranty. These limited warranties apply only in the United States and Canada.
Qualifications & exceptions
The limited warranties apply only in the United States and Canada.
Legal Rights & Agreement Rules · Context
The warranty grants specific legal rights that vary by state
The warranty gives the user specific legal rights, and the user may also have other rights that vary from state to state.
Supporting quotations
This warranty gives the user specific legal rights, and the user may also have other rights which vary from state to state.
Legal Rights & Agreement Rules · Procedure
Warranty and marketing claims go to binding arbitration on either party's election
Claims arising from the limited warranty or from the marketing, sale or performance of the purchased product, brought against Michelin North America and its agents, employees, dealers, affiliates, parent or sister corporations, related entities, predecessors, successors or assigns, are subject to binding arbitration. The warranty names consumer fraud and consumer protection statute claims among those covered, but excludes claims for personal injury or property damage. Both parties acknowledge a right to litigate yet waive it once either party elects arbitration, and the claims are resolved solely by arbitration under the National Arbitration Forum's procedures or a successor or mutually agreed arbitration service. All substantive questions of law are decided under the law of the state where the product was purchased.
Supporting quotations
HOW DO I DISPUTE ISSUES CONCERNING THIS WARRANTY?
ALL CLAIMS ARISING FROM THIS LIMITED WARRANTY OR THE MARKETING, SALE OR PERFORMANCE OF THE PURCHASED PRODUCT AGAINST MICHELIN NORTH AMERICA, INC. AND ITS AGENTS, EMPLOYEES, DEALERS, AFFILIATES, PARENT OR SISTER CORPORATIONS, RELATED CORPORATE ENTITIES,
PREDECESSORS,
SUCCESSORS OR ASSIGNS (HEREINAFTER COLLECTIVELY “MICHELIN”) SHALL BE SUBJECT TO BINDING ARBITRATION.
You and Michelin acknowledge your and its right to litigate claims, disputes and controversies arising out of or in connection with this limited warranty or the marketing, sale or performance of the purchased product in court, but prefer to resolve any such claims, disputes and controversies through arbitration and hereby waive the right to litigate such claims, disputes and controversies in court upon election of arbitration by either party.
Therefore, you and Michelin agree that all claims, disputes, and controversies between you and Michelin arising out of or in connection with this limited warranty, or any other warranties, express or implied, including a failure of warranty, or any claims arising out of or in connection with the marketing, sale or performance of the purchased product, including but not limited to claims for consumer fraud or brought under any consumer protection statute, but excluding claims for personal injury or property damage, shall be finally resolved solely by arbitration, upon election by either party, according to the formal dispute resolution procedures then in effect of the National Arbitration Forum, or if the National Arbitration Forum is no longer conducting such arbitrations, a successor organization thereto or such other private arbitration service as you and Michelin shall mutually agree (the actual authority involved, the “Arbitral Body”).
Qualifications & exceptions
Arises on election of arbitration by either party.
Personal injury and property damage claims are excluded.
Substantive law is that of the state where the product was purchased.
Legal Rights & Agreement Rules · Restriction or exception
Class, representative and private attorney general actions are barred in arbitration
A claim subject to arbitration may not be arbitrated as a class action, on a class-wide or representative basis, on behalf of the general public or on behalf of other similarly situated persons. The owner also agrees not to act as a private attorney general, a class representative or a member of a class of claimants for any claim subject to arbitration.
Supporting quotations
You agree that no claim subject to arbitration shall be arbitrated as a class action, or on a class-wide or representative basis, or on behalf of the general public, or on behalf of other persons that may be similarly situated.
You agree that you do not have the right to act as a private attorney general, a class representative, or to participate as a member of a class of claimants with any claim subject to arbitration.
Arbitration uses document hearings, splits arbitrator fees and bars jury and punitive awards
Arbitrations proceed as document hearings. Each party bears its own costs of the document hearing, but the arbitrator's fee is shared equally; a party that asks for procedures beyond a document hearing pays the extra fees, including filing and administrative fees. No claim subject to arbitration is heard by a jury, and the arbitrator's award is final and not subject to judicial review. The arbitrators may not award punitive or other damages not measured by the prevailing party's actual damages except as a statute requires. The award may be entered as a judgment in any court of competent jurisdiction, and claims may be filed through the National Arbitration Forum or at P.O. Box 50191, Minneapolis, MN 55405.
Supporting quotations
You further agree that no claim subject to arbitration shall be heard by a jury and that any judgment or award of the Arbitral Body will be final and not subject to judicial review.
All arbitrations will be conducted as document hearings.
Each party shall bear its own costs arising from and associated with the document hearing with the exception of the arbitrator’s fee which will be borne by all parties in equal shares. If either party requests any procedures beyond a document hearing, the requesting party will be responsible for all fees, including filing and administrative fees, above and beyond the fees required for document hearings.
The arbitrators will have no authority to award punitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute.
Any award of the arbitrator(s) may be entered as a judgment and shall be enforceable in any court of competent jurisdiction.
Information about arbitration may be obtained and claims may be filed at any office of the National Arbitration Forum or at P.O. Box 50191, Minneapolis, MN 55405.
Qualifications & exceptions
Document hearings unless a party requests more and pays the added fees.
Punitive damages only where a statute requires them.
Tire safety depends on following the manual's inspection and maintenance instructions
The tire is the only contact between the vehicle and the road surface. Michelin says following the inspection and maintenance instructions in the Owner's Manual is critical to help ensure safe use and longer tire life, and points to the Safe Driving page at michelinman.com for more information about the manual's safety instructions and procedures.
Supporting quotations
TIRE SAFETY AND MAINTENANCE
THE IMPORTANCE OF MAINTAINING SAFE TIRES
The tire is the only contact between your vehicle and the road surface. Following the inspection and maintenance instructions in this Owner’s Manual is critical to help ensure safe use and longer tire life.
Legal Rights & Agreement Rules · Procedure
Safety information comes from this manual, the tire sidewall and the vehicle placard
Michelin tells owners to read this Owner's Manual, the information on the tire sidewall, the vehicle owner's manual and the tire information placard that came with the vehicle for essential safety and maintenance information.
Supporting quotations
SAFETY MAINTENANCE INFORMATION
Read this Owner’s Manual, the information on the sidewall of your tires, your vehicle owner’s manual and the tire information placard that came on your vehicle for essential safety and maintenance information.
Account & Service Control · Company practice
Registering tires lets Michelin reach owners about safety developments
Michelin asks owners to register their tires so that Michelin can contact them about new safety developments, and gives www.tireregistration.com for online registration.
Supporting quotations
While you should have complete confidence in your new MICHELIN® tires, it’s important to register your tires so we can contact you about any new safety developments. For online tire registration, visit www.tireregistration.com.
Tire failures can follow punctures, impact, inflation, overloading or distortion
Michelin warns that any tire may fail after an improperly repaired puncture, impact damage, improper inflation, overloading, a crack, a bulge or other distortion, or other conditions resulting from use or misuse. Rapid air loss or tread and belt detachment may increase the risk of injury, death or property damage. Michelin says the risk is reduced by thoroughly reading and following this manual, the vehicle owner's manual, the tire information placard and tire sidewall safety information.
Supporting quotations
TIRE FAILURE – SAFETY WARNING
Any tire may fail as a result of an improperly repaired puncture, impact damage, improper inflation, overloading, a crack, a bulge or other distortion, or other conditions resulting from use or misuse.
Tire failures, such as a rapid air loss or a tread and belt detachment may increase risk of injury, death, or property damage.
Security & Safeguards · Procedure
After a tire failure, coast straight and brake gently rather than hard
On a tire failure, which may bring a loud noise, vibration or a pull toward the failed tire, Michelin says not to brake or turn the steering wheel abruptly. The driver should slowly release the accelerator, hold the wheel firmly to stay in lane, and once the vehicle has slowed and is controlled, brake gently, pull onto the shoulder and stop in the safest place. All tires should then be inspected. A flat, low, detached or otherwise damaged tire is replaced with a properly inflated spare after inspecting the spare; bumps, bulges or cracks call for inspection by a tire professional and no further driving on that tire. If there is no other option, Michelin says to drive as slowly and cautiously as possible until towing or mechanical help is available, and with an improperly inflated spare only as slowly as safely possible until it can be inflated and checked.
Supporting quotations
CONTROLLING A VEHICLE WHEN A TIRE FAILURE OCCURS
If a tire failure occurs, you may hear a loud noise, feel a vibration, or feel the vehicle pull toward the side of the failed tire.
If that happens, DO NOT BRAKE OR ABRUPTLY TURN THE STEERING WHEEL. Instead, slowly remove your foot from the accelerator and hold the steering wheel firmly while steering to remain in your lane.
Once the vehicle has slowed and is fully in your control, apply the brakes gently, safely pull over to the shoulder, and come to a stop in the safest location possible.
If any tire, including the spare, has bumps, bulges, cracks, or other visible damage, do not resume driving with that tire.
Qualifications & exceptions
Applies when the failure is heard, felt as vibration or felt as a pull toward the failed tire.
Driving on a damaged tire is limited to having no other option.
Security & Safeguards · Procedure
Correct pressures come from the placard or a Michelin retailer, never above the sidewall maximum
For tires that came as original equipment, the recommended operating pressures are on the vehicle's tire information placard, located in the door jamb, inside the fuel hatch or on the glove compartment door. For replacement tires, the owner asks a Michelin tire retailer for the correct pressure, and falls back to the placard. Those pressures are a minimum to maintain, and the Maximum Pressure rating on the tire sidewall must never be exceeded. Rear and front pressures may differ, and the Maximum Pressure rating is normally not equal to the placard pressure.
Supporting quotations
PROPER INFLATION
WARNING ON IMPROPERLY INFLATED TIRES.
DO NOT DRIVE UNNECESSARILY
DRIVING ON ANY TIRE THAT DOES NOT HAVE THE CORRECT INFLATION PRESSURE IS DANGEROUS
An underinflated tire builds up excessive heat that may result in sudden tire failure and an accident.
These inflation pressures must be maintained as a minimum. Never exceed the Maximum Pressure rating stated on the tire sidewall. Note that proper inflation pressures for rear tires may differ from proper inflation pressures for front tires. The Maximum Pressure rating on the tire is normally not equal to the placard pressure.
Qualifications & exceptions
The placard pressures are a minimum; the sidewall Maximum Pressure rating is a ceiling.
Rear tire pressures may differ from front tire pressures.
The warning section also tells drivers: “DO NOT DRIVE UNNECESSARILY”.
Security & Safeguards · Procedure
Inflation is checked cold at least monthly and before long trips
Michelin says failure to maintain correct inflation may cause improper vehicle handling, rapid and irregular tire wear, sudden tire failure, loss of vehicle control and an accident. Pressures should therefore be checked at least once each month and before every long-distance trip, for all tires including sealant types and self-supporting tires, which lose inflation as readily as any other tire if not maintained. Checks are made before the tires have been driven on, or after they cool to ambient temperature, because driving raises pressure and the recommended pressures are for tires not heated by recent driving.
Supporting quotations
CHECK THE COLD INFLATION PRESSURE IN ALL YOUR TIRES, INCLUDING THE SPARE, AT LEAST ONCE EACH MONTH
Failure to maintain correct inflation may result in improper vehicle handling and may cause rapid and irregular tire wear, sudden tire failure, loss of vehicle control, and an accident.
Therefore, inflation pressures should be checked at least once each month and before every long-distance trip.
Pressures should be checked before the tires have been driven on or after they have been allowed to cool down to the ambient air temperature.
Qualifications & exceptions
Applies to all tires, including sealant types and self-supporting tires.
Pressures are for cold tires, before driving or after cooling.
Security & Safeguards · Procedure
A pressure gauge, not a visual check, shows whether a tire is properly inflated
Tires must be checked monthly with a tire pressure gauge, because it is impossible to determine by looking at a tire whether it is properly inflated, and almost impossible to feel or hear underinflation or overinflation. Michelin suggests keeping an accurate, inexpensive gauge in the glove box or trunk and using it monthly and as otherwise needed.
Supporting quotations
UNDERINFLATION AND OVERINFLATION MUST BE CHECKED WITH A TIRE PRESSURE GAUGE
Tires must be checked monthly with a tire pressure gauge. It is impossible to determine whether tires are properly inflated by simply looking at them.
You should keep one in your vehicle’s glove box or trunk and use it monthly and as otherwise needed.
Security & Safeguards · Context
Deflated PAX and ZP tires handle differently and tolerate only limited low-pressure running
A vehicle running a deflated PAX System or Self-Supporting Zero Pressure tire handles differently from one on normally inflated tires, so drivers should avoid high speeds and hard cornering whenever a low-pressure warning activates. These tires can still build excessive heat when run underinflated for a long time, and how long they perform at low or zero inflation depends on the severity of the air loss, ambient temperature, speed and operating conditions, with hard braking, cornering and sharp maneuvers greatly reducing that time. Continuous use of an underinflated tire may lead to sudden tire failure and an accident, and a tire at low or zero pressure that begins to vibrate or affects handling should be replaced immediately with the temporary spare.
Supporting quotations
MICHELIN® PAX® SYSTEMTM TIRES AND SELF SUPPORTING ZERO PRESSURETM (ZP) TIRES AT LOW OR ZERO INFLATION
The handling characteristics of a vehicle with a deflated PAX® System tire or Self-Supporting Zero Pressure (ZP) tire (whether front or rear) are not the same as those of a vehicle with normally inflated tires. Avoid high speeds and hard cornering whenever a low-pressure warning is activated.
Even a MICHELIN PAX System tire or Self-Supporting Zero Pressure (ZP) tire can build up excessive heat when run underinflated for an extended period of time.
If a tire at low or zero pressure begins to vibrate or cause difficulty in vehicle handling, replace it immediately with the temporary spare.
Qualifications & exceptions
When PAX or ZP tires are original equipment, the vehicle owner's manual has the low pressure warning system details.
After a low-pressure warning on PAX or ZP tires, check all four tires with a gauge
PAX System tires depend on a functioning, correctly calibrated onboard tire pressure monitoring system. After any low-pressure warning, Michelin says to inspect the PAX or ZP tires visually and check all four with a pressure gauge. If the pressure is at or below 18 PSI, the tire goes to the nearest Authorized PAX System retailer or Michelin tire retailer for demounting and a thorough internal inspection. If no damage is visible and pressure is above 18 PSI, the tire is reinflated and checked again when cool, and a tire that has lost more than 5 PSI since the previous check goes in for inspection at once.
Supporting quotations
MICHELIN® PAX® SYSTEMTM TIRES AND SELF SUPPORTING ZERO PRESSURETM (ZP) TIRES AT LOW OR ZERO INFLATION
The PAX System™ requires a functioning, correctly calibrated onboard vehicle tire pressure monitoring system (TPMS) to monitor the inflation and alert the driver when a low pressure event occurs.
If the tire pressure is at or below 18 PSI, proceed to the nearest Authorized PAX System Retailer for PAX® tires or a Michelin tire retailer for ZP tires (or a representative of your vehicle manufacturer if advised to do so in your vehicle owner’s manual) and have the tire demounted and thoroughly inspected for possible internal damage.
When tires have cooled, check inflation again. If any tire has lost more than 5 PSI from the previous pressure check, have the tire inspected at once by an authorized PAX System Retailer for PAX tires or a Michelin tire retailer (or representative of your vehicle manufacturer if your vehicle owner’s manual so advises.)
Qualifications & exceptions
The 18 PSI threshold triggers demounting and internal inspection.
A loss of more than 5 PSI since the previous check requires immediate inspection.
ZP and PAX tires void the warranty without approved warning systems and correct wheels
MICHELIN Self-Supporting Zero Pressure (ZP) tires must be used only with an operational, Michelin-approved low tire pressure warning system, and PAX System tires only with a tire pressure monitoring system approved by the vehicle manufacturer; otherwise all provisions of the limited warranty are void. ZP tires marked SH-M can only be mounted on special SH-M wheels, and mounting one on a standard wheel voids the warranty and could make the tire unserviceable at low or zero pressure, with serious injury or death possible. Michelin points to its retailers and phone numbers for the lists of approved systems, and says the recommended operating pressures, which must be maintained as a minimum and never exceed the sidewall Maximum Pressure, come from the vehicle placard, a Michelin retailer for ZP tires or a PAX System retailer for PAX tires.
Supporting quotations
MICHELIN® SELF-SUPPORTING ZERO PRESSURE™ (ZP) TIRES MUST BE USED ONLY WITH AN OPERATIONAL, MICHELIN APPROVED, LOW TIRE PRESSURE WARNING SYSTEM. Otherwise, all provisions of the limited warranty are void.
DO NOT MOUNT A TIRE WITH THE SH-M DESIGNATION ON THE SIDEWALL ON A STANDARD WHEEL. DOING SO VOIDS THIS LIMITED WARRANTY AND COULD CAUSE THE TIRE TO BECOME UNSERVICEABLE AT LOW OR ZERO PRESSURE, RESULTING IN SERIOUS PERSONAL INJURY OR DEATH.
PAX SYSTEM TIRES ARE TO BE USED ONLY WITH AN OPERATIONAL TIRE PRESSURE MONITORING SYSTEM (TPMS) APPROVED BY THE VEHICLE MANUFACTURER FOR USE WITH THE PAX SYSTEM. Otherwise, all provisions of the limited warranty are void.
Recommended operating pressures will be provided by a Michelin tire retailer for self-supporting ZP tires. Recommended operating pressure for PAX System Tires will be provided by a PAX System retailer. These inflation pressures must be maintained as a minimum. Never exceed the Maximum Pressure rating shown on the tire sidewall.
Qualifications & exceptions
Approved warning systems are required; otherwise all warranty provisions are void.
SH-M designated ZP tires require SH-M wheels.
Recommended pressures are a minimum; the sidewall Maximum Pressure rating is the ceiling.
Not stated here
The lists of approved systems are not reproduced in this manual.
Check all four tires as soon as possible after a PAX or ZP low-pressure warning
Michelin tells owners of PAX System and ZP tires to check inflation pressures as soon as possible after a low pressure warning. After visually inspecting the tires, the owner checks all four with a pressure gauge and keeps the vehicle's tire pressure monitoring system functioning and correctly calibrated. At or below 18 PSI, the tire goes to the nearest Authorized PAX System retailer or Michelin tire retailer for demounting and internal inspection; above 18 PSI with no visible damage, it is reinflated and rechecked when cool. A loss of more than 5 PSI since the previous check requires immediate inspection, since delay may cause irreparable damage and sudden tire failure.
Supporting quotations
FOR MICHELIN® PAX SYSTEMTM TIRES/SELF-SUPPORTING ZERO PRESSURE (ZP) TIRES CHECK INFLATION PRESSURES AS SOON AS POSSIBLE FOLLOWING A LOW PRESSURE WARNING
The PAX System™ requires a functioning, correctly calibrated onboard vehicle tire pressure monitoring system (TPMS) to monitor the inflation and alert the driver when a low pressure event occurs.
If the tire pressure is at or below 18 PSI, proceed to the nearest Authorized PAX System Retailer for PAX® tires or a Michelin tire retailer for ZP tires (or a representative of your vehicle manufacturer if advised to do so in your vehicle owner’s manual) and have the tire demounted and thoroughly inspected for possible internal damage.
If any tire has lost more than 5 PSI from the previous pressure check, have the tire inspected at once by an authorized PAX System Retailer for PAX tires or a Michelin tire retailer (or representative of your vehicle manufacturer if your vehicle owner’s manual so advises.) Failure to do so may cause irreparable damage to the tire and result in sudden tire failure and an accident.
Qualifications & exceptions
18 PSI or less means demounting and internal inspection.
More than 5 PSI lost since the previous check means immediate inspection.
TPMS warns of low pressure but monthly manual checks still apply
A Tire Pressure Monitoring System monitors tire pressure and signals the driver when pressure falls below a predetermined level. Michelin says it should not replace monthly manual pressure checks of all four tires and the spare with a pressure gauge. The recommended pressure is the vehicle manufacturer's, found in the vehicle owner's manual and on the placard in the door jamb, fuel hatch or glove compartment door. Plus-size tires that need higher pressure require the TPMS to be recalibrated by the tire dealer or installer, and TPMS monitoring problems should be taken to the vehicle owner's manual and the vehicle manufacturer.
Supporting quotations
TIRE PRESSURE MONITORING SYSTEMS (TPMS):
Your vehicle is likely equipped with a Tire Pressure Monitoring System (TPMS) that is designed to monitor the pressure of tires mounted on your vehicle and sends a signal to the driver if a tire pressure falls below a predetermined level. A TPMS should not replace monthly manual pressure checks for all four tires and the spare.
You should check inflation in all your tires, including the spare, once each month and before every long trip.
If you have plus-size tires that require a higher inflation pressure, your tire pressure monitoring system will require re-calibration to the new proper inflation pressure.
Qualifications & exceptions
Applies to vehicles likely equipped with TPMS.
The spare is checked as well as the four road tires.
Security & Safeguards · Restriction or exception
Never spin wheels above 35 mph or stand near a spinning tire
Michelin warns against spinning wheels at more than 35 mph (55 km/h) as shown on the vehicle's speedometer, and against letting anyone stand near or behind a spinning tire. Excessive speed in a free-running, unloaded tire can make it explode from centrifugal force, and the released energy may cause serious physical injury or death. In mud, sand, snow, ice or another slippery condition the driver should avoid excessive wheel spin, since accelerating the motor, particularly with an automatic transmission, may spin a drive tire that has lost traction beyond its speed-enduring capability. The same applies when balancing a drive tire/wheel assembly on the vehicle using the engine.
Supporting quotations
TIRE SPINNING
WARNING
NEVER SPIN WHEELS ABOVE 35 MPH. NEVER ALLOW ANYONE TO STAND NEAR A SPINNING WHEEL.
Excessive speed in a free-running, unloaded tire can cause it to “explode” from centrifugal force. The energy released by such an explosion may cause serious physical injury or death. Never allow anyone to stand near or behind a spinning tire.
When in mud, sand, snow, ice, or another slippery condition, do not engage in excessive wheel spin.
Qualifications & exceptions
The limit is 35 mph (55 km/h) as indicated on the vehicle's speedometer.
Applies in mud, sand, snow, ice and other slippery conditions and when balancing a drive tire on the vehicle.
Security & Safeguards · Context
High speed driving leaves less room for hazards even at correct inflation
Michelin says correct inflation pressure is especially important at high speed, yet even with correct pressure a road hazard is harder to avoid at high speed and contact with it is more likely to damage the tire than at lower speed. Driving fast also reduces the reaction time available to avoid accidents and bring the vehicle to a safe stop.
Supporting quotations
HIGH SPEED DRIVING IS DANGEROUS
Correct inflation pressure is especially important. However, at high speeds, even with the correct inflation pressure, a road hazard is more difficult to avoid, and if tire contact is made with it, there is a greater chance of causing tire damage than at a lower speed. Moreover, driving at high speed reduces the reaction time available to avoid accidents and bring your vehicle to a safe stop.
Security & Safeguards · Restriction or exception
Do not drive faster than the tires' speed ratings or the legal limits
Michelin warns against driving at speeds faster than the speed ratings for the tires and against ever exceeding legal speed limits or speeds reasonable for the driving conditions. Exceeding the maximum speeds shown for each type of MICHELIN tire causes the tire to build up excessive heat, which can damage it and lead to sudden tire failure and rapid air loss; failing to control the vehicle when one or more tires lose air rapidly can lead to an accident. In any case, the driver should not exceed reasonable speeds as indicated by the legal limits and driving conditions.
Supporting quotations
WARNING
DO NOT DRIVE AT SPEEDS FASTER THAN THE SPEED RATINGS FOR YOUR TIRES. NEVER EXCEED LEGAL SPEED LIMITS OR SPEEDS REASONABLE FOR THE DRIVING CONDITIONS.
Exceeding the maximum speeds shown on the following page for each type of MICHELIN® tire will cause the tire to build up excessive heat, which can cause tire damage that could result in sudden tire failure and rapid air loss.
In any case, you should not exceed reasonable speeds as indicated by the legal limits and driving conditions.
Qualifications & exceptions
Legal speed limits and speeds reasonable for the driving conditions remain upper bounds.
Michelin's speed rating table pairs each speed symbol with its speed in kilometres per hour and miles per hour: L 120 km/h (75 mph), M 130 (81), N 140 (87), P 150 (94), Q 160 (100), R 170 (106), S 180 (112), T 190 (118), U 200 (124) and H 210 (130).
Supporting quotations
| Speed Symbol | | Speed (km/h) | Speed (mph) |
| L | | 120 | 75 |
| M | | 130 | 81 |
| N | | 140 | 87 |
| P | | 150 | 94 |
| Q | | 160 | 100 |
| R | | 170 | 106 |
| S | | 180 | 112 |
| T | | 190 | 118 |
| U | | 200 | 124 |
| H | | 210 | 130 |
Security & Safeguards · Context
Speed symbols V through (Y) run from 149 mph upward
The same table continues with V 240 km/h (149 mph), W and ZR 270 (168), Y 300 (186) and (Y) above 300 km/h, with the manual directing the reader to consult the tire manufacturer above 186 mph.
A speed rating states the speed at which a tire can carry a load
The manual defines the speed rating of a tire as indicating the speed, or range category of speeds, at which the tire can carry a load under specified service conditions. The extracted text sets this definition out in fragments around the table, so the sentence is reassembled from the pieces quoted here rather than read as continuous prose in one block.
Supporting quotations
The speed rating of a tire indicates the speed
(or range category of
at which speeds) tire can carry under specified
the
a load
service
Not stated here
The PDF text extraction interleaves this definition with the speed table, so the sentence is split across blocks and its original typography is not visible.
Security & Safeguards · Context
The speed rating system runs from letters A to Z
Michelin describes the speed rating system used today as developed in Europe to categorize tires into standardized speeds, with a letter from A to Z symbolizing a tire's certified speed rating and ranging from 5 km/h (3 mph) to above 300 km/h (186 mph). The chart on the page states the top speed for which a tire is certified. The extracted text breaks this discussion into fragments around the table.
Supporting quotations
The speed conditions.
rating system used today
was developed in Europe in response to the need
to categorize tires into
standardized speeds.
A letter from A to Z
symbolizes a tire’s certified
speed rating, ranging from 5 km/h (3 mph) to
300 km/h above
(186
mph). This rating system
(see chart on this page)
describes the top speed
for which a tire is certified.
Not stated here
The extracted fragments mix the end of the definition with the start of this discussion, so word order across blocks is uncertain.
Security & Safeguards · Context
The Unlimited V, Limited V and Z or (Y) categories mark added speed steps
Michelin explains that when the rating system was developed, the Unlimited V category above 210 km/h (130 mph) was the top speed rating. New tires in that category led to the Limited V category at 240 km/h (149 mph) and the Z or (Y) rating as the top rating, with W and Y limited speed symbols added as higher speed categories. The manual says to always consult the tire manufacturer for the maximum speed of Unlimited Z or (Y) tires, and that a tire's speed rating is identified as part of its sizing or service description. Exceeding the lawful speed limit is neither recommended nor endorsed.
Supporting quotations
When this speed rating was originally system developed, the Unlimited
As manufacturers made more tires that fit into this category, it was necessary to better regulate performance at standardized speeds to help ensure safety.
Always consult the tire manufacturer for the maximum speed of Unlimited Z or (Y) tires. Speed rating is identified as a part of the tire’s sizing or service description. Exceeding the lawful speed limit is neither recommended nor endorsed.
Security & Safeguards · Procedure
The service description combines load index and speed rating
Except for Unlimited Z, the ratings incorporate the speed symbol and load index as the tire's service description. The manual decodes the example 205/60R15 91V: 205 is the section width in millimetres, 60 the aspect ratio, R radial construction, 15 the rim diameter in inches, and 91V the service description carrying the load index and speed rating. Where Z appears in the size description together with the service description, the maximum speed is indicated by the service description.
Supporting quotations
In the latest attempt to standardize tire designations, all ratings except Unlimited Z incorporate the speed symbol and load index as the tire’s service description.
For Example:
205/60R15 91V
Section Width in Millimeters 205 =
60 = Aspect Ratio
R = Radial Construction
15 = Rim Diameter in Inches Service Description (Load Index and Speed Rating) 91V = “Z” Rated Tires
When “Z” appears in the size description with the service description, the maximum speed is indicated by the service description.
Qualifications & exceptions
Unlimited Z ratings are the exception to the service-description rule.
Security & Safeguards · Context
Z designations mark tires capable of more than 149 mph
The manual lists example Z designations (P275/40ZR17, P275/40R17 93Y, P275/40ZR17 93Y and P275/40ZR17 (93Y)) next to a maximum-speed column, with a note to consult the tire manufacturer. It states that a Z may appear in the size designation for tires capable of more than 240 km/h (149 mph), and must appear with Y in parenthesis in the service description for tires above 300 km/h (186 mph), giving 275/40ZR18 (99Y) as an example. Where there is no service description, the manufacturer is consulted for maximum speed.
Supporting quotations
Examples:
Tire Designation
P275/40ZR17
P275/40R17 93Y
P275/40ZR17 93Y
P275/40ZR17 (93Y)
*Consult Tire Manufacturer
Maximum Speed
Above 240 km/h (149 mph)* 300 km/h (186 mph)
300 km/h (186 mph)
Above 300 km/h (186 mph)*
For tires having a maximum speed capability above 240 km/h (149 mph), a “Z” may appear in the size designation.
For tires having a maximum speed capability above 300 km/h (186 mph), a “Z” must appear in the size designation and the service description must include Y in parenthesis. Example: 275/40ZR18 (99Y). Consult the tire manufacturer for maximum speed when there is no service description.
Qualifications & exceptions
A Z mark alone means above 149 mph; above 186 mph requires Z plus Y in parenthesis.
Not stated here
The PDF extraction separates the example designations from their maximum-speed column, so which example row carries which speed is not reliable from the stored text.
Security & Safeguards · Restriction or exception
Speed ratings assume sound, correctly inflated tires and do not authorize unsafe driving
Michelin says speed ratings rest on laboratory tests that relate to road performance but do not apply if the tires are underinflated, overloaded, worn out, damaged, altered, improperly repaired or retreaded. A rating does not imply that a vehicle can safely be driven at the tire's maximum speed, especially in adverse road or weather conditions or with an unusual vehicle. Highway passenger tires without a speed symbol are rated at 105 mph (170 km/h), light truck highway tires without a symbol at 87 mph (140 km/h), and winter tires without a symbol or with Q at 100 mph (160 km/h), while winter tires with a symbol follow the symbol. Retreaded tire ratings are assigned by the retreader and replace the manufacturer's ratings. A replacement tire's speed rating should be equal to or higher than the original equipment rating; if it is lower, the vehicle top speed becomes limited to the lower rating and the customer must be told about the new restriction and possible handling impact.
Supporting quotations
Exceeding the maximum speeds shown on the following page for each type of MICHELIN® tire will cause the tire to build up excessive heat, which can cause tire damage that could result in sudden tire failure and rapid air loss.
Speed ratings are based on laboratory tests that relate to performance on the road, but are not applicable if tires are underinflated, overloaded, worn out, damaged, altered, improperly repaired, or retreaded.
Michelin highway passenger tires that do not have a speed symbol on the sidewall have a maximum speed rating of 105 mph (170 km/h). Light truck highway tires that do not have a speed symbol on the sidewall of the tire have a maximum speed rating of 87 mph (140 km/h). Michelin winter tires that do not have a speed symbol on the sidewall or tires with Q symbols have a speed rating of 100 mph (160 km/h).
The speed and other ratings of retreaded tires are assigned by the retreader and replace the original manufacturer’s ratings.
IMPORTANT: The replacement tire speed rating should be equal to or higher than the OEM tire speed rating. If a lower speed rated tire is selected, then the vehicle top speed becomes limited to that of the lower speed rating selected. The customer must be informed of the new speed restriction and that the vehicle’s handling may be adversely impacted.
Qualifications & exceptions
Ratings do not apply to underinflated, overloaded, worn out, damaged, altered, improperly repaired or retreaded tires.
A replacement tire's rating should be equal to or higher than the original equipment rating.
Tires without a speed symbol still have fixed maximum speeds
Michelin highway passenger tires without a speed symbol on the sidewall have a maximum speed rating of 105 mph (170 km/h), light truck highway tires without a symbol 87 mph (140 km/h), and winter tires without a symbol or with a Q symbol 100 mph (160 km/h); winter tires with a symbol follow the symbol. The manual adds that a tire may be speed-rated yet no vehicle should be operated unsafely or unlawfully, and that ratings are not applicable to underinflated, overloaded, worn out, damaged, altered, improperly repaired or retreaded tires. A replacement tire's speed rating should equal or exceed the original equipment rating; a lower rating limits the vehicle's top speed, and the customer must be told about the restriction and possible handling impact.
Supporting quotations
Although a tire may be speed-rated, no vehicle should be operated in an unsafe or unlawful manner.
Speed ratings are based on laboratory tests that relate to performance on the road, but are not applicable if tires are underinflated, overloaded, worn out, damaged, altered, improperly repaired, or retreaded.
Michelin highway passenger tires that do not have a speed symbol on the sidewall have a maximum speed rating of 105 mph (170 km/h). Light truck highway tires that do not have a speed symbol on the sidewall of the tire have a maximum speed rating of 87 mph (140 km/h). Michelin winter tires that do not have a speed symbol on the sidewall or tires with Q symbols have a speed rating of 100 mph (160 km/h).
IMPORTANT: The replacement tire speed rating should be equal to or higher than the OEM tire speed rating. If a lower speed rated tire is selected, then the vehicle top speed becomes limited to that of the lower speed rating selected. The customer must be informed of the new speed restriction and that the vehicle’s handling may be adversely impacted.
Qualifications & exceptions
Ratings do not apply to underinflated, overloaded, worn out, damaged, altered, improperly repaired or retreaded tires.
A lower replacement rating limits the vehicle to that speed.
Hitting a road hazard calls for an immediate inspection, visible damage or not
Road hazards and objects such as potholes, curbs, glass, metal, rocks, wood and debris can damage a tire and should be safely avoided. If the vehicle hits such a hazard, Michelin says to inspect the tires promptly. A damaged tire or wheel is replaced at once with a properly inflated spare, and all tires, including the spare, go to a tire professional, or to an authorized PAX System retailer for PAX System tires. A tire that hits a road hazard can be damaged without any visible surface sign, and impact damage can cause a sudden failure a day, a week or even months later. Air loss, unusual or localized wear or vibrations can also signal internal damage, and an impact with a curb, pothole or debris, or an unusual vibration, calls for replacing the tire and wheel with a properly inflated spare and visiting a qualified tire professional immediately.
Supporting quotations
INSPECT YOUR TIRES. DO NOT DRIVE ON A DAMAGED TIRE OR WHEEL.
WARNING
INSPECT AND REPLACE ANY VISIBLY DAMAGED TIRE IMMEDIATELY AFTER STRIKING ANY OBJECT IN THE ROAD.
Road hazards and objects in the road, such as potholes, curbs, glass, metal, rocks, wood, and debris, can damage a tire and should be safely avoided.
A tire that hits a road hazard or object can be damaged but not have any visible sign of damage on its surface. A tire damaged by an impact can suddenly fail a day, a week, or even months later.
If you suspect any damage to your tire or wheel from an impact with a curb, pothole, debris on the road, or any other road hazard or object, or if you feel or hear any unusual vibration, replace the tire and wheel with a properly inflated spare at once and immediately visit a qualified tire professional.
Qualifications & exceptions
The damage may be invisible and surface only later.
Security & Safeguards · Procedure
Inspect tires monthly and after any hazard, looking for bulges, cracks and penetrations
Michelin warns not to drive unnecessarily on a tire or wheel with any visible damage and tells owners to replace a damaged tire with a properly inflated spare at once and visit a Michelin Tire Retailer. Tires are inspected at least once per month and immediately after contacting a road hazard or object such as a curb, pothole or debris. The inspection includes the spare, checks inflation, and where a tire has lost two pounds or more of pressure, looks for penetration, valve leakage or wheel damage that may explain the loss. Owners look for bulges, cracks, cuts, penetrations and abnormal tire wear, particularly at the tread edges, since these may come from misalignment, road hazards or improper inflation, and a damaged tire must be inspected by a Michelin tire retailer at once because use could lead to tire failure and an accident. Tires wear faster under high speeds, hard cornering, rapid starts, sudden stops, poor roads and off-road use, so after driving on roads with holes, rocks or other objects Michelin says to examine the tires for cuts, bumps, bulges, penetrations or unusual wear before returning to normal or highway speeds.
Supporting quotations
INSPECTION
WARNING
DO NOT DRIVE UNNECESSARILY ON A TIRE OR WHEEL WITH ANY VISIBLE DAMAGE.
If you see any damage to a tire or wheel, replace it with a properly inflated spare at once and visit a Michelin Tire Retailer.
Inspect your tires at least once per month, and immediately after contacting any road hazard or object, such as a curb, a pothole, or debris.
If the pressure check indicates that one of your tires has lost pressure of two pounds or more, look for signs of penetration, valve leakage, or wheel damage that may account for the air loss.
Always look for bulges, cracks, cuts, penetrations, and abnormal tire wear, particularly on the edges of the tire tread. Any of these may be caused by misalignment, contact with road hazards or objects, or improper inflation. If any such damage is found, the tire must be inspected by your Michelin tire retailer at once.
All tires will wear out faster when subjected to high speeds, hard cornering, rapid starts, sudden stops, frequent driving on roads that are in poor condition, or off-road use.
Qualifications & exceptions
Inspection is monthly and immediately after any road hazard contact.
A loss of two pounds or more of pressure prompts a search for penetration, valve leakage or wheel damage.
Security & Safeguards · Procedure
Wear bars at 2/32 inch mark the end of safe tread life
MICHELIN tires have wear bars in the tread grooves at 2/32nds of an inch (1.6 mm). When the remaining tread matches the height of the wear bars, the tires must be replaced to ensure tire safety, and tires worn beyond that stage are extremely dangerous. The manual points to the Safe Driving pages on michelinman.com for illustrated tire inspection guidance.
Supporting quotations
TREAD WEAR BARS INDICATE THE LIMIT OF TREAD LIFE
MICHELIN® tires contain “Wear Bars” in the tire tread grooves at 2/32nds of an inch (1.6 mm). When the tread remaining matches the height of the Wear Bars, your tires must be replaced to ensure tire safety. Tires worn beyond this stage are extremely dangerous.
Never load a tire beyond its sidewall rating or an axle beyond its weight rating
Michelin warns against driving on overloaded tires. The maximum load rating is molded on the tire sidewall and must not be exceeded, and the owner should follow the vehicle manufacturer's loading instructions so the tires are not overloaded. A tire loaded beyond its maximum allowable load for the application builds up excessive heat that may cause sudden tire failure and an accident, and the gross axle weight rating for any axle on the vehicle must not be exceeded.
Supporting quotations
LOADING
WARNING
DO NOT DRIVE ON OVERLOADED TIRES. DRIVING ON ANY OVERLOADED TIRE IS DANGEROUS.
The maximum load rating of your tires is molded on the tire sidewall. Do not exceed this rating. Follow the loading instructions of the manufacturer of your vehicle to ensure that your tires are not overloaded.
Tires loaded beyond their maximum allowable loads for the particular application will build up excessive heat that may result in sudden tire failure and an accident. Do not exceed the gross axle weight rating for any axle on your vehicle.
Qualifications & exceptions
The load limit is the sidewall rating; the axle limit is the gross axle weight rating.
Security & Safeguards · Procedure
Trailer towing needs retailer advice on tire size and pressure
Before towing a trailer, Michelin advises visiting a Michelin tire retailer for advice about the correct tire size and pressures, which depend on the type and size of trailer and hitch used. In no case may the maximum cold inflation pressure or the tire load rating be exceeded. The vehicle's tire information placard and the vehicle manufacturer's owner's manual hold further trailer-towing recommendations.
Supporting quotations
TRAILER TOWING
If you anticipate towing a trailer, you should visit your Michelin tire retailer for advice about the correct tire size and pressures.
Tire size and pressures will depend on the type and size of trailer and hitch utilized, but in no case must the maximum cold inflation pressure or tire load rating be exceeded.
Qualifications & exceptions
Tire size and pressure depend on the trailer and hitch.
The maximum cold inflation pressure and the load rating are absolute ceilings.
Security & Safeguards · Restriction or exception
A PAX or ZP tire at low pressure must not continue towing a trailer
Michelin calls operation of PAX or ZP tires at low or zero inflation with a trailer in tow dangerous and to be avoided. If the low pressure warning activates while towing, the driver stops, disconnects the trailer, and does not continue towing until the tire has been properly repaired and reinflated. A tire that cannot be repaired must be replaced with a new full-size, matching PAX or ZP tire and inflated properly before the trailer is towed again.
Supporting quotations
MICHELIN® PAX SystemTM Tires/Self-Supporting Zero Pressure (ZP) Tires and Trailer Towing
Operation of PAX® or ZP tires at low or zero inflation with a trailer in tow is dangerous and should be avoided.
If the low pressure warning indicator is activated when a trailer is in tow, stop, disconnect the trailer, and do not continue to tow the trailer until the tire has been properly repaired and re-inflated to the proper inflation.
Qualifications & exceptions
The warning indicator must have activated while a trailer is in tow.
Security & Safeguards · Procedure
Alignment and balance problems show as uneven wear or vibration and need checking at once
Michelin warns against driving on unevenly worn, out of alignment or unbalanced tires and says alignment and balancing are important for safety and maximum mileage. Uneven wear such as the inside shoulder wearing faster than the rest of the tread, or excessive vibration, may mean the vehicle is out of alignment or balance; these conditions shorten tire life and adversely affect handling, which could be dangerous. Irregular wear or vibration calls for an immediate alignment and balance check. Tires run underinflated show more wear on the shoulders than in the center, and the manual directs the owner to its tire rotation and replacement instructions.
Supporting quotations
WHEEL ALIGNMENT AND BALANCING ARE IMPORTANT FOR SAFETY AND MAXIMUM MILEAGE FROM YOUR TIRES.
WARNING
DO NOT DRIVE ON UNEVENLY WORN, OUT OF ALIGNMENT, OR UNBALANCED TIRES.
CHECK HOW YOUR TIRES ARE WEARING AT LEAST ONCE EACH MONTH
If your tires are wearing unevenly, such as the inside shoulder of the tire wearing faster than the rest of the tread, or if you detect excessive vibration, your vehicle may be out of alignment or balance.
Tires that have been run underinflated will show more wear on the shoulders than in the center of the tread.
Qualifications & exceptions
Underinflation shows up as shoulder wear rather than center wear.
Security & Safeguards · Restriction or exception
Keep the same size and type of tire on all four wheels and the spare
MICHELIN tires are radial tires, and Michelin says the same size and type of tire should be used on all four wheel positions for best, safe performance, with a full-size spare of the same size and type. Before mixing different tire types in any configuration, the owner should check the vehicle manufacturer's owner's manual for its recommendations. That check is especially important when mixing, matching or replacing tires on four-wheel drive vehicles, which may require special precautions.
Supporting quotations
TIRE MIXING
WARNING MIXED TIRES.
DO NOT DRIVE ON IMPROPERLY
MICHELIN® tires are radial tires. For best, safe performance, the same size and type of tire should be used on all four wheel positions, and the full size spare should be the same size and type.
It is especially important to check the vehicle manufacturer’s owner’s manual when mixing, matching, or replacing tires on 4-wheel drive vehicles, as this may require special precautions.
Qualifications & exceptions
Applies to mixing different tire types in any configuration.
Four-wheel drive vehicles may need special precautions.
Not stated here
The warning heading and the paragraph below it split the sentence 'DO NOT DRIVE ON IMPROPERLY MIXED TIRES' across two blocks.
Security & Safeguards · Restriction or exception
PAX and ZP tires must not be mixed with conventional tires
Michelin says PAX System tires should not be mixed with non-PAX tires, nor Self-Supporting Zero Pressure (ZP) tires with non-ZP tires, apart from temporary use of the properly inflated spare if the vehicle is so equipped.
Supporting quotations
PAX® SYSTEM™ TIRES SHOULD NOT BE MIXED WITH NON-PAX TIRES NOR SELF-SUPPORTING ZERO PRESSURE™ (ZP) TIRES WITH NON-ZP TIRES OTHER THAN THE TEMPORARY USE OF THE PROPERLY INFLATED SPARE IF THE VEHICLE IS SO EQUIPPED.
Qualifications & exceptions
Temporary use of the properly inflated spare is the stated exception.
Security & Safeguards · Procedure
M+S marks all-season tires; four dedicated winter tires are recommended
Tires meeting the US Tire Manufacturers Association definition of snow tires are marked M/S, M+S or M&S, normally called All-Season tires, and tires without that notation are not recommended for winter driving in regions that experience winter conditions. All-Season tires are designed to provide reliable performance in some winter conditions, but Michelin recommends four winter tires for optimal performance. Tires designated for severe winter conditions are marked on at least one sidewall with the letters M and S plus a mountain-with-snowflake pictograph. If such a tire must be temporarily replaced with one not so marked, the driver should immediately drive at a safe speed to a Michelin dealer so the spare returns to the trunk and a matching marked tire goes back on the vehicle.
Supporting quotations
WINTER DRIVING
Tires that meet the US Tire Manufacturers Association (USTMA) definition of snow tires are marked M/S, M+S, or M&S.
Tires without this notation are not recommended for winter driving in regions that experience winter conditions.
Although All-Season tires are designed to provide reliable performance in some winter conditions, the use of four winter tires is recommended for optimal performance.
Tires designated for use in severe winter conditions are marked on at least one sidewall with the letters “M” and “S” plus a pictograph of a mountain with a snowflake on it.
If such a tire needs to be temporarily replaced with a tire not so marked, you should immediately drive at a safe speed to a Michelin dealer to have the spare returned to the trunk and replaced on your vehicle by another tire with the letters “M” and “S” and the related pictograph.
Qualifications & exceptions
Tires without an M/S, M+S or M&S marking are not recommended for winter driving where winter conditions occur.
Severe winter tires carry M and S plus the mountain-snowflake pictograph.
Security & Safeguards · Procedure
Rotate every 6,000 to 8,000 miles, or sooner at the first sign of irregular wear
Michelin says tires must be rotated for maximum tread life, every 6,000 to 8,000 miles (10,000 to 12,000 km) or as the vehicle manufacturer specifies, whichever occurs more frequently, and monthly inspection for tire wear is recommended. Tires are rotated at the first sign of irregular wear, even before 6,000 miles (10,000 km). Directional tires must follow the arrows molded on the sidewall. Some TPMS units may not recognize that a tire has moved position, so the system should be reset as needed, and inflation may need adjustment after rotation because front and rear pressures can differ by load position. Vehicles with different size tires front and rear have rotation restrictions, and the vehicle owner's manual holds the proper rotation recommendations.
Supporting quotations
TIRE ROTATION AND REPLACEMENT
To obtain maximum tread life, you must rotate your tires.
You should rotate your tires every 6,000-8,000 miles (10,000-12,000 km) or as specified by your vehicle manufacturer, whichever occurs more frequently.
Your tires should be rotated at the first sign of irregular wear, even if it occurs before 6,000 miles (10,000 km).
When rotating tires with a directional tread pattern, observe the arrows molded on the sidewall that show the direction in which the tire should rotate.
Some Tire Pressure Monitoring Systems (TPMS) may not recognize that a tire has been moved to a different position on your vehicle. Make certain that your TPMS system is reset, if necessary, so as to correctly identify the location of each tire on your vehicle.
Some vehicles may have tires of different sizes mounted on the front versus the rear axles, and these different tires have rotation restrictions.
Qualifications & exceptions
The shorter of the 6,000-8,000 mile interval and the vehicle manufacturer's specification applies.
Staggered front and rear sizes carry rotation restrictions.
Security & Safeguards · Procedure
A full-size spare joins the five-tire rotation only after inspection
Full-size spare tires, as distinct from temporary spares, of the same size and construction should be used in a five-tire rotation and inspected by a tire professional during routine tire inspection, and spare tires are always inspected before installation. Before the spare joins the rotation, its inflation pressure is checked and it is examined for cracking or other damage. A damaged or underinflated tire is not used unless there is no other option, in which case the driver should drive only as slowly as is safely possible until the tire can be inflated and checked by a professional. Michelin says to follow the vehicle manufacturer's recommended rotation pattern, or see a qualified tire professional if none is available.
Supporting quotations
Full-size Spare
Full-size spare tires (not temporary spares) of the same size and construction should be used in a five-tire rotation and should be inspected by a tire professional during routine tire inspection.
Always check the inflation pressure of the full-size spare and look for any indication of cracking or other damage immediately before incorporating the spare into rotation.
Follow the vehicle manufacturer’s recommended pattern for rotation. If such a recommendation is unavailable, see a qualified tire professional.
Qualifications & exceptions
Applies to full-size spares, not temporary spares.
The spare is inspected and its pressure checked immediately before it joins the rotation.
Security & Safeguards · Company practice
Replace all four tires together, or put a pair of new tires on the rear
Michelin says all four tires should be replaced at the same time. If only two tires are replaced, the new ones should go on the rear, because deeper tread on the rear axle provides better handling, wet grip and water evacuation, helping avoid oversteer and loss of stability on wet surfaces. Deeper tread on the front axle can improve wet straight-line braking and stopping distance. If only two tires are replaced, Michelin generally recommends installing them on the rear axle unless a tire service professional or the consumer prefers otherwise.
Supporting quotations
Replacement of Two Tires
All four tires should be replaced at the same time.
However, if only two tires are replaced, the new ones should be put on the rear. Deeper tread tires on the rear axle provide better handling, wet grip and evacuate water, thereby helping to avoid oversteer and loss of vehicle stability on wet surfaces.
Deeper tread tires on the front axle can improve wet straight line braking and stopping distance.
If only two tires are being replaced, Michelin generally recommends they be installed on the rear axle in the absence of a tire service professional’s recommendation or consumer’s preference to the contrary.
Qualifications & exceptions
The rear-axle recommendation yields to a contrary professional recommendation or consumer preference.
Security & Safeguards · Context
SUVs and light trucks roll over more easily, and modifications raise the risk
Because of their size, weight and higher center of gravity, SUVs and light trucks do not handle like automobiles, and Michelin says failing to operate them properly and safely can increase the likelihood of vehicle rollover. Modifications to tire size, tire type, wheels or suspension can change the vehicle's handling characteristics and further raise the rollover risk. Whether the vehicle keeps its original equipment configuration or has been modified, Michelin says to drive safely, avoid sudden sharp turns and lane changes, and obey all traffic laws, since otherwise the driver may lose control, causing an accident and serious injury or death.
Supporting quotations
CUSTOMIZATION OF TIRES, WHEELS, OR SUSPENSION ON SUVS AND LIGHT TRUCKS
Due to their size, weight and higher center of gravity, vehicles such as SUVs and light trucks do not have the same handling characteristics as automobiles. Because of these different characteristics, failure to operate your SUV or truck in a proper and safe manner can increase the likelihood of vehicle rollover.
Modifications to your SUV or truck tire size, tire type, wheels or suspension can change your vehicle’s handling characteristics and further increase the likelihood of vehicle rollover.
Whether your SUV or truck has the original equipment configuration for tires, wheels and suspension or whether any of these items have been modified, always drive safely, avoid sudden, sharp turns or lane changes and obey all traffic laws.
Qualifications & exceptions
Applies whether the vehicle is in its original configuration or modified.
Legal Rights & Agreement Rules · Restriction or exception
Alterations to tires void warranty coverage and can cause accidents
Michelin tells owners not to make or allow alterations to their tires, because alterations may prevent proper performance and lead to tire damage that can cause an accident. Tires that become unserviceable through alterations such as truing, whitewall inlays, adding balancing or sealant liquids, or using tire dressing containing petroleum distillates are excluded from warranty coverage.
Supporting quotations
TIRE ALTERATIONS
WARNING DO NOT DRIVE ON ALTERED TIRES.
Do not make or allow to be made any alterations on your tires.
Tires that become unserviceable due to alterations such as truing, whitewall inlays, addition of balancing or sealant liquids, or the use of tire dressing containing petroleum distillates, are excluded from warranty coverage.
Qualifications & exceptions
The exclusion applies to tires that become unserviceable because of the alteration.
Security & Safeguards · Procedure
A punctured tire is demounted, inspected and repaired only within narrow limits
Michelin warns against driving on improperly repaired tires or on mismatched tires and rims, and says to see a MICHELIN tire retailer, or another qualified tire professional if none is readily available, whenever a repair is needed. A punctured MICHELIN tire is demounted and thoroughly inspected for damage. A tread area puncture on a passenger or light truck tire can be repaired only if the hole is no more than 1/4 inch in diameter, no more than one radial cable per casing ply is damaged, and the tire has not been damaged further by the puncturing object or by running underinflated. Repairs consistent with those guidelines follow the US Tire Manufacturers Association's recommended procedures.
Supporting quotations
TIRE REPAIRS
WARNING
DO NOT DRIVE ON IMPROPERLY REPAIRED TIRES OR ON MISMATCHED TIRES AND RIMS.
WHENEVER A REPAIR IS NEEDED, IMMEDIATELY SEE YOUR MICHELIN® TIRE RETAILER OR, IF ONE IS NOT READILY AVAILABLE, ANOTHER QUALIFIED TIRE PROFESSIONAL
A tread area puncture in any MICHELIN® passenger or light truck tire can be repaired if the puncture hole is not more than 1/4" in diameter, not more than one radial cable per casing ply is damaged, and the tire has not been damaged further by the puncturing object or by running underinflated.
Qualifications & exceptions
Puncture hole no more than 1/4 inch in diameter.
No more than one radial cable per casing ply damaged.
No further damage from the object or from running underinflated.
Security & Safeguards · Procedure
Repairs use a plug and inside patch with the tire off the rim, and never below 2/32 inch
Repairs of all tires must combine a plug with an inside patch, and MICHELIN tires, including PAX System tires, must be removed from the wheel for inspection before repair. Plug-type repairs made on a tire still mounted on a wheel are improper and can cause an accident, as is any repair done without removing the tire from the rim. An improperly repaired tire may leak air or let air, moisture and contaminants into its structure, and it can fail suddenly later. Michelin says never to repair a tire with less than 2/32nds of an inch of tread remaining, because at that depth the tire is worn out and must be replaced.
Supporting quotations
Repairs of all tires must be of the combined-plug-and-inside-patch type.
Your MICHELIN tires (including Michelin PAX System™ tires) must be removed from the wheel for inspection prior to repair.
Plug-type repairs made on a tire that remains mounted on a wheel are improper and can result in an accident.
Never repair a tire with less than 2/32nds of an inch of tread remaining. At this tread depth, the tire is worn out and must be replaced.
Qualifications & exceptions
The tire must come off the rim for inspection and repair.
A tire with less than 2/32nds of an inch of tread is not repaired.
Security & Safeguards · Procedure
Store tires cool, dry and indoors, and take the weight off for a month or more
Tires carry materials that protect their outer surfaces from ozone and weather checking, and those materials migrate to the surface as the tire rolls and flexes during normal use. When tires sit outdoors unused for a month or more, their surfaces dry out and become more susceptible to ozone and weather checking, and the casing becomes susceptible to flat spotting. Michelin therefore says tires should be stored in a cool, dry, clean, indoor environment, with the weight removed, by raising the vehicle or taking the tires off it, if storage lasts a month or more. Failing to store tires this way could damage them or age them prematurely and lead to sudden tire failure. Stored tires are kept away from heat and ozone sources such as hot pipes and electric generators, and on surfaces free of grease, gasoline or other substances that could deteriorate the rubber.
Supporting quotations
STORAGE
For this reason, tires should always be stored in a cool, dry, clean, indoor environment.
If storage is for one month or more, eliminate the weight from the tires by raising the vehicle or by removing the tires from the vehicle.
When tires are stored, be sure they are placed away from sources of heat and ozone such as hot pipes and electric generators.
Be sure that surfaces on which tires are stored are clean and free from grease, gasoline or other substances which could deteriorate the rubber.
Qualifications & exceptions
Weight removal applies to storage of one month or more.
Storage surfaces must be clean and free of grease, gasoline and similar substances.
Security & Safeguards · Context
Trunk heat is a reason to include the spare in the rotation
Michelin explains that temperatures in a vehicle's closed trunk, especially in sunny areas, can become high enough over a sustained period to cause small cracks or other property changes in a tire stored there. Such changes accumulate and can weaken the tire and, especially if it is not kept properly inflated, make it unsafe to use when needed. That is one reason the spare tire should be included in the tire rotation schedule.
Supporting quotations
One reason why your spare tire should be included in the tire rotation schedule is that temperatures in a vehicle’s closed trunk, especially in sunny geographical areas, can become high enough so that, over a sustained period, they can cause small cracks or other changes to the properties of a tire stored in the trunk.
Security & Safeguards · Procedure
Mounting needs trained professionals, sound wheels and no mismatched parts
Tire mounting can be dangerous and must be done by professionally trained persons using proper tools and procedures specified by the US Tire Manufacturers Association. MICHELIN PAX System tires must be mounted and dismounted only by specially trained, authorized MICHELIN PAX System retailers using equipment designed for the system. Tires go on wheels of the correct size and type in good, clean condition, because bent, chipped, rusted or corroded wheels may damage a tire, and the inside of the tire must be free of foreign material. Mismatched tires and rims can explode during mounting or fail dangerously on the road. A tire mounted by error on the wrong-sized rim is not remounted on the proper rim but scrapped, because it may have been internally damaged by being stretched.
Supporting quotations
PROPER TIRE MOUNTING
Tire mounting can be dangerous and must be done by professionally trained persons using proper tools and procedures as specified by the US Tire Manufacturers Association (USTMA).
MICHELIN® PAX System™ tires must be mounted and dismounted only by specially trained, authorized MICHELIN PAX System retailers, utilizing equipment designed for the MICHELIN PAX System.
Your tires should be mounted on wheels that are the correct size and type and are in good, clean condition. Wheels that are bent, chipped, rusted (steel wheels) or corroded (alloy wheels) may cause tire damage.
Mismatched tires and rims can explode during mounting. Also, mismatched tires and rims can result in dangerous tire failure on the road.
If a tire is mounted by error on the wrong-sized rim, do not remount it on the proper rim – scrap it.
Qualifications & exceptions
PAX System tires require specially trained, authorized PAX System retailers.
Security & Safeguards · Procedure
Fit new valves, use tubeless wheels and balance every tire and wheel assembly
Old valves may leak, so when new tubeless tires are mounted Michelin says to install new valves of the correct type. Tubeless tires must be mounted only on wheels designed for tubeless tires, meaning wheels with safety humps or ledges, and the PAX System valve stem and pressure sensor combination must be in good condition. Valve caps capable of containing the tire's inflation should always be used, since the cap is the primary seal against air loss if the valve core leaks. Each tire and wheel assembly should be balanced for proper performance and to maintain tire warranty coverage, because unbalanced assemblies may cause steering difficulties, a bumpy ride and irregular tire wear.
Supporting quotations
Old valves may leak. When new tubeless tires are mounted, have new valves of the correct type installed.
Tubeless tires must be mounted only on wheels designed for tubeless tires, i.e., wheels that have safety humps or ledges.
Always utilize valve caps capable of containing the tire’s inflation, should the valve core leak. The valve cap is the primary seal against air loss.
Each tire and wheel assembly should be balanced to ensure proper tire and vehicle performance and to maintain tire warranty coverage.
Tires and wheel assemblies that are not balanced may cause steering difficulties, a bumpy ride, and irregular tire wear.
Qualifications & exceptions
Tubeless tires require wheels with safety humps or ledges.
Security & Safeguards · Restriction or exception
PAX System tires and wheels cannot be mixed with any other system
MICHELIN PAX System wheels differ from all other wheels. Michelin says never to attempt mounting a non-PAX System tire on a PAX System wheel or a PAX System tire on a non-PAX System wheel, which could cause serious injury or death. Every PAX System component, meaning tire, wheel, support ring, pressure sensor and gel, must be used, properly functioning and correctly installed by an Authorized PAX System retailer, and the PAX System must be used on all wheel positions. After a low or zero pressure driving event the PAX System tire and wheel may be hot to the touch, and Michelin says to let the tire cool before handling it.
Supporting quotations
SPECIAL MOUNTING INSTRUCTIONS FOR MICHELIN PAX SYSTEMTM TIRES
MICHELIN PAX System™ wheels differ from all other wheels. Never attempt to mount a non-PAX System tire on a PAX System wheel, or a PAX System tire on a non-PAX System wheel. Attempting to do so could cause serious injury or death.
All PAX System components (tire, wheel, support ring, pressure sensor and gel) must be utilized. Never utilize a PAX System tire and wheel without every other properly functioning component part, correctly installed by an Authorized PAX System retailer.
The PAX System must be used on all wheel positions.
After a low or zero pressure driving event, the PAX System tire and wheel may be hot to the touch. Always allow a PAX System tire to cool before attempting to handle it.
Qualifications & exceptions
All PAX System components must be used together.
The system must be installed by an Authorized PAX System retailer on all wheel positions.
Security & Safeguards · Procedure
ZP tires need trained mounting and must cool before anyone handles them
ZP tires can be more difficult to mount than conventional tires and should be mounted and demounted only by a properly trained tire professional. Because they can generate tremendous heat when run at low or zero pressure, Michelin says to always allow a ZP tire to cool before attempting to handle it, and failure to do so could result in injury or death. MICHELIN ZP tires are tubeless tires designed to operate in emergency conditions at low or zero inflation.
Supporting quotations
SPECIAL MOUNTING INSTRUCTIONS FOR SELF- SUPPORTING ZERO PRESSURE™ (ZP) TIRES
ZP tires can be more difficult to mount than conventional tires. They should be mounted and demounted only by a properly trained tire professional.
ZP tires can generate a tremendous amount of heat when run at low or zero pressure. ALWAYS ALLOW A ZP TIRE TO COOL BEFORE ATTEMPTING TO HANDLE IT. FAILURE TO DO SO COULD RESULT IN INJURY OR DEATH.
Michelin® ZP tires are tubeless tires designed to operate in emergency conditions at low or zero inflation.
Qualifications & exceptions
Mounting and demounting by a properly trained tire professional only.
Security & Safeguards · Restriction or exception
SH-M designated ZP tires need SH-M wheels to keep zero-pressure capability
Some MICHELIN ZP tires perform with zero pressure capability only when mounted on special SH-M (Symmetric Hump-Modified) wheels, and those tires bear the SH-M designation immediately after the ZP designation on the sidewall. Michelin warns against mounting ZP tires with the SH-M designation on standard wheels, because in such applications the tires may become unserviceable at low or zero pressure and cause serious injury or death.
Supporting quotations
MICHELIN® SELF SUPPORTING ZERO PRESSURE™
(ZP) TIRES AND SPECIAL SH-M (SYMMETRIC HUMP- MODIFIED) WHEELS
Some MICHELIN® ZP tires can perform with zero pressure capability only when mounted on special SH-M wheels. These tires bear the SH-M designation immediately following the ZP designation on the sidewall of the tire.
WARNING
DO NOT MOUNT ZP TIRES WITH THE SH-M DESIGNATION ON STANDARD WHEELS. IN SUCH APPLICATIONS, THE TIRES MAY BECOME UNSERVICEABLE AT LOW OR ZERO PRESSURE, CAUSING SERIOUS INJURY OR DEATH.
Qualifications & exceptions
The SH-M marking on the sidewall identifies tires that require SH-M wheels.
Security & Safeguards · Restriction or exception
TRX tires fit only special TR or JM wheels
The TRX tire is a tubeless tire that must be mounted only on special wheels (TR or JM type) with millimetric seat diameter. Mounted on standard wheels, TRX tires will not retain air because of an air escape feature designed into the bead area of these tires.
Supporting quotations
SPECIAL MOUNTING INSTRUCTIONS FOR TRXTM TIRES
The TRX™ tire is a tubeless tire that must only be mounted on special wheels (TR or JM type) with millimetric seat diameter. If TRX tires are mounted on standard wheels, they will not retain air due to an air escape feature designed into the bead area of these tires.
Qualifications & exceptions
Only TR or JM type wheels with millimetric seat diameter.
Security & Safeguards · Restriction or exception
Do not fit tubes to TRX tires, and use them on all wheel positions
Michelin tells owners not to try to override the TRX bead feature by mounting TRX tires with tubes. The MICHELIN TRX must be used on all wheel positions, and Michelin warns that failing to follow this instruction can cause an accident with serious injury, death and property damage.
Supporting quotations
WARNING
DO NOT TRY TO OVERRIDE THIS FEATURE BY MOUNTING TRX TIRES WITH TUBES. THE MICHELIN® TRX MUST BE USED ON ALL WHEEL POSITIONS.
Qualifications & exceptions
The TRX must be used on all wheel positions.
Security & Safeguards · Procedure
Temporary spare tires follow the vehicle manufacturer's instructions
When using any temporary type spare tire, Michelin says to be sure to follow the vehicle manufacturer's instructions.
Supporting quotations
TEMPORARY TYPE SPARE TIRES
When using any temporary type spare tire, be sure to follow the vehicle manufacturer’s instructions.
Security & Safeguards · Procedure
The DOT code identifies where and when a tire was made
The DOT symbol certifies the manufacturer's compliance with U.S. Department of Transportation tire safety standards, and beside it sits the tire identification or serial number. The first two characters identify the plant, the next two reflect the tire size, one to four following digits may carry a manufacturer's descriptive code, and the last characters identify the week and year of manufacture. For the 1990-1999 decade MICHELIN tires are marked with a triangle pointing to the last three numeric characters, and tires produced after July 2000 carry an additional decade digit: 2800 means the 28th week of 2000 and 0201 the 2nd week of 2001. Where the last digits contain three numeric characters and no triangle, Michelin says to consult a qualified tire professional to determine the year of manufacture. The manual also shows the older and newer DOT layouts, including the 13-digit format phased in from 2018 and in effect for all plants by 2025.
Supporting quotations
READING THE DOT
DOT XXXX XXXX XXX (prior to August 2000)
(1990-1999) DOT XXXX XXXX XXX
DOT XXXX XXXX XXXX (after July 2000 to 2025)
DOT XXXXX XXXX XXXX (transition to 13 digits beginning 2018; in effect for all plants by 2025)
THE DOT
The “DOT” symbol certifies a tire manufacturer’s compliance with U.S. Department of Transportation tire safety standards.
The first two characters identify the plant where the tire was manufactured. The next two characters reflect the tire size.
For example, 2800 means the tire was produced during the 28th week of 2000; 0201 during the 2nd week of 2001.
If the last digits of your DOT number contain three numeric characters and are not marked with a triangle, consult a qualified tire professional to determine the year of manufacture.
Qualifications & exceptions
After July 2000 the last digits add a decade digit.
A three-digit code without a triangle requires professional interpretation.
Security & Safeguards · Procedure
Replace tires in service ten years or more, and have five-year-old ones inspected yearly
Michelin explains that a tire's materials evolve with weather, storage and use, so the serviceable life of a specific tire cannot be predicted in advance. Passenger car and light truck tires, including spares, should be inspected regularly by a qualified tire specialist such as a Michelin retailer, and tires in use five years or more should keep being inspected by a specialist at least annually. Changes such as increased air loss, noise or vibration may indicate the tire should come out of service to prevent failure. Calendar age alone cannot tell when a tire should be replaced, but while most tires need replacement before ten years, Michelin recommends replacing any tire in service ten years or more from the date of manufacture, including spares, as a precaution, even if it looks serviceable and has not reached the legal wear limit. For tires that came on an original equipment vehicle, the vehicle manufacturer's tire replacement recommendations apply when specified, but not beyond ten years. The date of manufacture is on the sidewall in the DOT code, which ends with the week and year, for example a code ending 2214 for the 22nd week of 2014.
Supporting quotations
SERVICE LIFE FOR PASSENGER CAR AND LIGHT TRUCK TIRES INCLUDING SPARE TIRES
it is recommended that passenger car and light truck tires, including spare tires be inspected regularly by a qualified tire specialist, such as a Michelin tire retailer, who will assess the tire’s suitability for continued service.
Tires which have been in use for 5 years or more should continue to be inspected by a specialist at least annually.
While most tires will need replacement before they achieve 10 years, it is recommended that any tires in service 10 years or more from the date of manufacture, including spare tires, be replaced with new tires as a precaution even if such tires appear serviceable and even if they have not reached the legal wear limit.
For tires that were on an original equipment vehicle (i.e., acquired by the consumer on a new vehicle), follow the vehicle manufacturer’s tire replacement recommendations, when specified (but not to exceed 10 years).
It is impossible to predict when tires should be replaced based on their calendar age alone.
For example, a DOT code ending with “2214” indicates a tire made in the 22nd week of 2014.
Qualifications & exceptions
Tires in use five years or more are inspected by a specialist at least annually.
Ten years is a precautionary replacement point, not a prediction based on calendar age alone.
Original equipment vehicle recommendations apply when specified, not beyond ten years.
Security & Safeguards · Procedure
The closing checklist collects the manual's safety precautions
Michelin closes with a list of precautions to avoid tire damage and possible accident: inspect tires at least monthly and immediately after striking any road hazard; check pressure at least once a month when tires are cold and before every long trip; never underinflate or overinflate; never overload the vehicle or tires; obey legal speed limits and drive at a reasonable speed for road and weather conditions; avoid potholes, obstacles, curbs and pavement edges; avoid excessive wheel spinning; replace a damaged tire with a properly inflated spare and visit a qualified tire professional at once; keep tires and wheels aligned, balanced and rotated; have mounting and repairs done by a tire professional; and ask a Michelin tire retailer with any questions. Michelin warns that failing to follow any of these precautions can lead to erratic vehicle behavior or tire damage, possibly resulting in an accident.
Supporting quotations
REMEMBER... TO AVOID DAMAGE TO YOUR TIRES AND POSSIBLE ACCIDENT:
INSPECT TIRES AT LEAST MONTHLY, AND IMMEDIATELY AFTER STRIKING ANY ROAD HAZARD.
CHECK TIRE PRESSURE AT LEAST ONCE EACH MONTH WHEN TIRES ARE COLD AND BEFORE EVERY LONG TRIP.
NEVER UNDERINFLATE OR OVERINFLATE A TIRE.
NEVER OVERLOAD YOUR VEHICLE AND TIRES.
ALWAYS OBEY LEGAL SPEED LIMITS AND DRIVE AT A SPEED THAT IS REASONABLE UNDER THE ROAD AND WEATHER CONDITIONS.
AVOID DRIVING OVER POTHOLES, OBSTACLES, CURBS OR EDGES OF PAVEMENT.
AVOID EXCESSIVE WHEEL SPINNING.
IF YOU SEE ANY DAMAGE TO A TIRE, REPLACE THE TIRE WITH A PROPERLY INFLATED SPARE AND VISIT A QUALIFIED TIRE PROFESSIONAL AT ONCE.
KEEP TIRES AND WHEELS PROPERLY ALIGNED, BALANCED, AND ROTATED.
HAVE MOUNTING AND REPAIRS DONE BY A TIRE PROFESSIONAL.
IF YOU HAVE ANY QUESTIONS, CONTACT YOUR MICHELIN TIRE RETAILER.
FAILURE TO FOLLOW ANY OF THE RECOMMENDED PRECAUTIONS CONTAINED IN THIS OWNER’S MANUAL CAN LEAD TO ERRATIC VEHICLE BEHAVIOR OR TIRE DAMAGE, POSSIBLY RESULTING IN AN ACCIDENT.
Account & Service Control · Procedure
Damage questions go to a Michelin retailer or the US phone line
If an owner sees or suspects damage to tires or wheels, Michelin says to contact a local Michelin tire retailer, or visit the web site listed for dealer locations, and to contact the listed number, 1-800-847-3435, if further assistance is required. The same page gives the contact section the heading IN THE USA.
Supporting quotations
If you see or suspect any damage to your tires or wheels, contact your local Michelin tire retailer, or visit our web site listed below for dealer locations. If further assistance is required, contact:
IN THE USA
1-800-847-3435
Qualifications & exceptions
The listed phone number is for the USA.
Account & Service Control · Procedure
US owners reach Michelin by phone, mail or the michelinman.com site
In the USA, Michelin's contact details are the phone number 1-800-847-3435, a written request to Michelin North America, Inc., Attention: Consumer Care Department, Post Office Box 19001, Greenville, SC 29602-9001, or the web site www.michelinman.com.
Supporting quotations
IN THE USA
1-800-847-3435
or write:
Michelin North America, Inc.
Attention: Consumer Care Department Post Office Box 19001
Greenville, SC 29602-9001
or visit:
www.michelinman.com
Qualifications & exceptions
The details are given for the USA.
Account & Service Control · Procedure
Canadian owners reach Michelin in Laval, Quebec or at michelin.ca
In Canada, Michelin's contact details are the phone number 1-888-871-4444, a written request to Michelin North America (Canada) Inc., 2500 Daniel Johnson, Suite 500, Laval, Quebec H7T 2P6, or the web site www.michelin.ca.
Supporting quotations
IN CANADA
1-888-871-4444
or write:
Michelin North America (Canada) Inc.
2500 Daniel Johnson, Suite 500
Laval, Quebec
H7T 2P6
or visit:
www.michelin.ca
Qualifications & exceptions
The details are given for Canada.
Account & Service Control · Procedure
Roadside assistance has its own telephone number
The contact pages list a separate Roadside Assistance number, 1-888-553-4327.
Supporting quotations
For Roadside Assistance call: 1-888-553-4327
Sharing & Disclosure · Company commitment
Michelin does not sell or rent names and cannot use registration data for marketing
Michelin states that it does not sell or rent names to third parties, and that it cannot use tire registration information for marketing purposes.
Supporting quotations
We do not sell or rent names to third parties. We cannot use tire registration information for marketing purposes.
Legal Rights & Agreement Rules · Company commitment
Tire registration is not required for warranty coverage
The manual states that tire registration is not required for warranty coverage. Registration is nevertheless presented elsewhere as the step that makes tires eligible for the MICHELIN Promise Plan benefits.
Supporting quotations
Tire registration is not required for warranty coverage.
Qualifications & exceptions
This statement addresses warranty coverage, not the Promise Plan benefits.
Not stated here
The manual does not reconcile registration-based Promise Plan eligibility with this statement that registration is not required for warranty coverage.
Cross-references
contrast (model-proposed): Registration at tireregistration.com is the route into the Promise Plan — Registration is presented at the front as the step that makes tires eligible for the Promise Plan benefits, while the back pages say tire registration is not required for warranty coverage. Read together, registration gates the Promise Plan benefits but not the limited warranty itself; the manual does not reconcile the two statements.
Content & IP Rights · Context
Back cover promotes the Road Atlas and Michelin social media
The back cover is promotional: it invites the reader to enjoy scenic drives with Michelin's North America Road Atlas, described as a companion for local and regional drives with stops in national and state parks, 1,000 travel center locations, 245 inset city maps and GPS coordinates to more than 2,500 parks. It also invites readers to follow Michelin on social media for news and events.
Supporting quotations
ENJOY
SCENIC DRIVES –
Michelin’s North America Road Atlas is the ultimate companion for inspiring local and regional drives with stops in national and state parks, including 1,000 travel center locations for easy pit stops, 245 inset city maps and GPS coordinates to more than 2500 parks.
Connect with Michelin.
Follow us on social media to keep up with Michelin news and events.
Legal Rights & Agreement Rules · Context
This manual is the 2022 revision MDW41156 Rev. 05/22
The back cover identifies the publisher and edition: Michelin North America, Inc., P.O. Box 19001, Greenville, SC 29602-9001 USA, an Equal Opportunity Employer, with copyright 2022 and all rights reserved. It notes that the Michelin Man is a registered trademark owned by Michelin, and carries the revision code MDW41156 Rev. 05/22.
Supporting quotations
Michelin North America, Inc., P.O. Box 19001, Greenville, SC 29602-9001 USA
The Michelin Man is a registered trademark owned by Michelin.
MDW41156 Rev. 05/22
Account & Service Control · Company practice
The back cover asks owners to register so Michelin can contact them
The closing page says owners should have complete confidence in their new MICHELIN tires and repeats that it is important to register the tires in case Michelin needs to contact them, pointing to www.tireregistration.com for online registration.
Supporting quotations
Have complete confidence in your new MICHELIN ® tires.
It’s important to register your tires in the event that we need to contact you. For online tire registration, visit www.tireregistration.com.